arm64: mvebu: armada-8k: Only configure xHCI power on DB-88F7040 board

This patch uses of_machine_is_compatible() to detect the board at runtime
and only configured the I2C IO expander for the xHCI power / reset on
the DB-88F7040 board. As this code will be used by other Armada-7k/8k
ports, its necessary to use this runtime detection here.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>

1 files changed, 78 insertions, 68 deletions

diff --git a/board/Marvell/mvebu_armada-8k/board.c b/board/Marvell/mvebu_armada-8k/board.c
index 48bd55c..7d1b5d9 100644
--- a/board/Marvell/mvebu_armada-8k/board.c
+++ b/board/Marvell/mvebu_armada-8k/board.c
@@ -5,6 +5,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <i2c.h>
 #include <asm/io.h>
 #include <asm/arch/cpu.h>
@@ -12,6 +13,11 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/*
+ * Information specific to the DB-88F7040 eval board. We strive to use
+ * DT for such platform specfic configurations. At some point, this
+ * might be removed here and implemented via DT.
+ */
 /* IO expander I2C device */
 #define I2C_IO_EXP_ADDR		0x21
 #define I2C_IO_CFG_REG_0	0x6
@@ -44,45 +50,47 @@ int board_xhci_config(void)
 	int ret;
 	u8 buf[8];
 
-	/* Configure IO exander PCA9555: 7bit address 0x21 */
-	ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev);
-	if (ret) {
-		printf("Cannot find PCA9555: %d\n", ret);
-		return 0;
-	}
-
-	/*
-	 * Read configuration (direction) and set VBUS pin as output
-	 * (reset pin = output)
-	 */
-	ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1);
-	if (ret) {
-		printf("Failed to read IO expander value via I2C\n");
-		return -EIO;
-	}
-	buf[0] &= ~I2C_IO_REG_VBUS;
-	buf[0] &= ~I2C_IO_REG_CL;
-	ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1);
-	if (ret) {
-		printf("Failed to set IO expander via I2C\n");
-		return -EIO;
-	}
-
-	/* Read output value and configure it */
-	ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
-	if (ret) {
-		printf("Failed to read IO expander value via I2C\n");
-		return -EIO;
+	if (of_machine_is_compatible("marvell,armada7040-db")) {
+		/* Configure IO exander PCA9555: 7bit address 0x21 */
+		ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev);
+		if (ret) {
+			printf("Cannot find PCA9555: %d\n", ret);
+			return 0;
+		}
+
+		/*
+		 * Read configuration (direction) and set VBUS pin as output
+		 * (reset pin = output)
+		 */
+		ret = dm_i2c_read(dev, I2C_IO_CFG_REG_0, buf, 1);
+		if (ret) {
+			printf("Failed to read IO expander value via I2C\n");
+			return -EIO;
+		}
+		buf[0] &= ~I2C_IO_REG_VBUS;
+		buf[0] &= ~I2C_IO_REG_CL;
+		ret = dm_i2c_write(dev, I2C_IO_CFG_REG_0, buf, 1);
+		if (ret) {
+			printf("Failed to set IO expander via I2C\n");
+			return -EIO;
+		}
+
+		/* Read output value and configure it */
+		ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
+		if (ret) {
+			printf("Failed to read IO expander value via I2C\n");
+			return -EIO;
+		}
+		buf[0] &= ~I2C_IO_REG_VBUS;
+		buf[0] |= I2C_IO_REG_CL;
+		ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
+		if (ret) {
+			printf("Failed to set IO expander via I2C\n");
+			return -EIO;
+		}
+
+		mdelay(500); /* required delay to let output value settle */
 	}
-	buf[0] &= ~I2C_IO_REG_VBUS;
-	buf[0] |= I2C_IO_REG_CL;
-	ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
-	if (ret) {
-		printf("Failed to set IO expander via I2C\n");
-		return -EIO;
-	}
-
-	mdelay(500); /* required delay to let output value settle */
 
 	return 0;
 }
@@ -93,38 +101,40 @@ int board_xhci_enable(void)
 	int ret;
 	u8 buf[8];
 
-	/*
-	 * This function enables all USB ports simultaniously,
-	 * it only needs to get called once
-	 */
-	if (usb_enabled)
-		return 0;
-
-	/* Configure IO exander PCA9555: 7bit address 0x21 */
-	ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev);
-	if (ret) {
-		printf("Cannot find PCA9555: %d\n", ret);
-		return 0;
-	}
-
-	/* Read VBUS output value */
-	ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
-	if (ret) {
-		printf("Failed to read IO expander value via I2C\n");
-		return -EIO;
+	if (of_machine_is_compatible("marvell,armada7040-db")) {
+		/*
+		 * This function enables all USB ports simultaniously,
+		 * it only needs to get called once
+		 */
+		if (usb_enabled)
+			return 0;
+
+		/* Configure IO exander PCA9555: 7bit address 0x21 */
+		ret = i2c_get_chip_for_busnum(0, I2C_IO_EXP_ADDR, 1, &dev);
+		if (ret) {
+			printf("Cannot find PCA9555: %d\n", ret);
+			return 0;
+		}
+
+		/* Read VBUS output value */
+		ret = dm_i2c_read(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
+		if (ret) {
+			printf("Failed to read IO expander value via I2C\n");
+			return -EIO;
+		}
+
+		/* Enable VBUS power: Set output value of VBUS pin as enabled */
+		buf[0] |= I2C_IO_REG_VBUS;
+		ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
+		if (ret) {
+			printf("Failed to set IO expander via I2C\n");
+			return -EIO;
+		}
+
+		mdelay(500); /* required delay to let output value settle */
+		usb_enabled = 1;
 	}
 
-	/* Enable VBUS power: Set output value of VBUS pin as enabled */
-	buf[0] |= I2C_IO_REG_VBUS;
-	ret = dm_i2c_write(dev, I2C_IO_DATA_OUT_REG_0, buf, 1);
-	if (ret) {
-		printf("Failed to set IO expander via I2C\n");
-		return -EIO;
-	}
-
-	mdelay(500); /* required delay to let output value settle */
-	usb_enabled = 1;
-
 	return 0;
 }