1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
|
/*
* Copyright 2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
#ifdef CONFIG_SYS_FSL_SRDS_1
static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
#endif
int is_serdes_configured(enum srds_prtcl device)
{
int ret = 0;
#ifdef CONFIG_SYS_FSL_SRDS_1
if (!serdes1_prtcl_map[NONE])
fsl_serdes_init();
ret |= serdes1_prtcl_map[device];
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
if (!serdes2_prtcl_map[NONE])
fsl_serdes_init();
ret |= serdes2_prtcl_map[device];
#endif
return !!ret;
}
int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 cfg = gur_in32(&gur->rcwsr[4]);
int i;
switch (sd) {
#ifdef CONFIG_SYS_FSL_SRDS_1
case FSL_SRDS_1:
cfg &= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
cfg >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
break;
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
case FSL_SRDS_2:
cfg &= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
cfg >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
break;
#endif
default:
printf("invalid SerDes%d\n", sd);
break;
}
/* Is serdes enabled at all? */
if (unlikely(cfg == 0))
return -ENODEV;
for (i = 0; i < SRDS_MAX_LANES; i++) {
if (serdes_get_prtcl(sd, cfg, i) == device)
return i;
}
return -ENODEV;
}
int get_serdes_protocol(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 cfg = gur_in32(&gur->rcwsr[4]) &
FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
cfg >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
return cfg;
}
const char *serdes_clock_to_string(u32 clock)
{
switch (clock) {
case SRDS_PLLCR0_RFCK_SEL_100:
return "100";
case SRDS_PLLCR0_RFCK_SEL_125:
return "125";
case SRDS_PLLCR0_RFCK_SEL_156_25:
return "156.25";
default:
return "100";
}
}
void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
u8 serdes_prtcl_map[SERDES_PRCTL_COUNT])
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 cfg;
int lane;
if (serdes_prtcl_map[NONE])
return;
memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT);
cfg = gur_in32(&gur->rcwsr[4]) & sd_prctl_mask;
cfg >>= sd_prctl_shift;
printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg);
if (!is_serdes_prtcl_valid(sd, cfg))
printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
if (unlikely(lane_prtcl >= SERDES_PRCTL_COUNT))
debug("Unknown SerDes lane protocol %d\n", lane_prtcl);
else
serdes_prtcl_map[lane_prtcl] = 1;
}
/* Set the first element to indicate serdes has been initialized */
serdes_prtcl_map[NONE] = 1;
}
__weak int get_serdes_volt(void)
{
return -1;
}
__weak int set_serdes_volt(int svdd)
{
return -1;
}
int setup_serdes_volt(u32 svdd)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
struct ccsr_serdes *serdes1_base;
#ifdef CONFIG_SYS_FSL_SRDS_2
struct ccsr_serdes *serdes2_base;
#endif
u32 cfg_rcw4 = gur_in32(&gur->rcwsr[4]);
u32 cfg_rcw5 = gur_in32(&gur->rcwsr[5]);
u32 cfg_tmp, reg = 0;
int svdd_cur, svdd_tar;
int ret;
int i;
/* Only support switch SVDD to 900mV/1000mV */
if (svdd != 900 && svdd != 1000)
return -EINVAL;
svdd_tar = svdd;
svdd_cur = get_serdes_volt();
if (svdd_cur < 0)
return -EINVAL;
debug("%s: current SVDD: %dmV; target SVDD: %dmV\n",
__func__, svdd_cur, svdd_tar);
if (svdd_cur == svdd_tar)
return 0;
serdes1_base = (void *)CONFIG_SYS_FSL_SERDES_ADDR;
#ifdef CONFIG_SYS_FSL_SRDS_2
serdes2_base = (void *)serdes1_base + 0x10000;
#endif
/* Put the all enabled lanes in reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
reg = in_be32(&serdes1_base->lane[i].gcr0);
reg &= 0xFF9FFFFF;
out_be32(&serdes1_base->lane[i].gcr0, reg);
}
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
reg = in_be32(&serdes2_base->lane[i].gcr0);
reg &= 0xFF9FFFFF;
out_be32(&serdes2_base->lane[i].gcr0, reg);
}
#endif
/* Put the all enabled PLL in reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
reg = in_be32(&serdes1_base->bank[i].rstctl);
reg &= 0xFFFFFFBF;
reg |= 0x10000000;
out_be32(&serdes1_base->bank[i].rstctl, reg);
udelay(1);
reg = in_be32(&serdes1_base->bank[i].rstctl);
reg &= 0xFFFFFF1F;
out_be32(&serdes1_base->bank[i].rstctl, reg);
}
udelay(1);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
reg = in_be32(&serdes2_base->bank[i].rstctl);
reg &= 0xFFFFFFBF;
reg |= 0x10000000;
out_be32(&serdes2_base->bank[i].rstctl, reg);
udelay(1);
reg = in_be32(&serdes2_base->bank[i].rstctl);
reg &= 0xFFFFFF1F;
out_be32(&serdes2_base->bank[i].rstctl, reg);
}
udelay(1);
#endif
/* Put the Rx/Tx calibration into reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
reg = in_be32(&serdes1_base->srdstcalcr);
reg &= 0xF7FFFFFF;
out_be32(&serdes1_base->srdstcalcr, reg);
reg = in_be32(&serdes1_base->srdsrcalcr);
reg &= 0xF7FFFFFF;
out_be32(&serdes1_base->srdsrcalcr, reg);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
reg = in_be32(&serdes2_base->srdstcalcr);
reg &= 0xF7FFFFFF;
out_be32(&serdes2_base->srdstcalcr, reg);
reg = in_be32(&serdes2_base->srdsrcalcr);
reg &= 0xF7FFFFFF;
out_be32(&serdes2_base->srdsrcalcr, reg);
#endif
/*
* If SVDD set failed, will not return directly, so that the
* serdes lanes can complete reseting.
*/
ret = set_serdes_volt(svdd_tar);
if (ret)
printf("%s: Failed to set SVDD\n", __func__);
/* Wait for SVDD to stabilize */
udelay(100);
/* For each PLL that’s not disabled via RCW */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
reg = in_be32(&serdes1_base->bank[i].rstctl);
reg |= 0x00000020;
out_be32(&serdes1_base->bank[i].rstctl, reg);
udelay(1);
reg = in_be32(&serdes1_base->bank[i].rstctl);
reg |= 0x00000080;
out_be32(&serdes1_base->bank[i].rstctl, reg);
/* Take the Rx/Tx calibration out of reset */
if (!(cfg_tmp == 0x3 && i == 1)) {
udelay(1);
reg = in_be32(&serdes1_base->srdstcalcr);
reg |= 0x08000000;
out_be32(&serdes1_base->srdstcalcr, reg);
reg = in_be32(&serdes1_base->srdsrcalcr);
reg |= 0x08000000;
out_be32(&serdes1_base->srdsrcalcr, reg);
}
}
udelay(1);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
reg = in_be32(&serdes2_base->bank[i].rstctl);
reg |= 0x00000020;
out_be32(&serdes2_base->bank[i].rstctl, reg);
udelay(1);
reg = in_be32(&serdes2_base->bank[i].rstctl);
reg |= 0x00000080;
out_be32(&serdes2_base->bank[i].rstctl, reg);
/* Take the Rx/Tx calibration out of reset */
if (!(cfg_tmp == 0x3 && i == 1)) {
udelay(1);
reg = in_be32(&serdes2_base->srdstcalcr);
reg |= 0x08000000;
out_be32(&serdes2_base->srdstcalcr, reg);
reg = in_be32(&serdes2_base->srdsrcalcr);
reg |= 0x08000000;
out_be32(&serdes2_base->srdsrcalcr, reg);
}
}
udelay(1);
#endif
/* Wait for at lesat 625us to ensure the PLLs being reset are locked */
udelay(800);
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
/* if the PLL is not locked, set RST_ERR */
reg = in_be32(&serdes1_base->bank[i].pllcr0);
if (!((reg >> 23) & 0x1)) {
reg = in_be32(&serdes1_base->bank[i].rstctl);
reg |= 0x20000000;
out_be32(&serdes1_base->bank[i].rstctl, reg);
} else {
udelay(1);
reg = in_be32(&serdes1_base->bank[i].rstctl);
reg &= 0xFFFFFFEF;
reg |= 0x00000040;
out_be32(&serdes1_base->bank[i].rstctl, reg);
udelay(1);
}
}
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
for (i = 0; i < 2 && !(cfg_tmp & (0x1 << (1 - i))); i++) {
reg = in_be32(&serdes2_base->bank[i].pllcr0);
if (!((reg >> 23) & 0x1)) {
reg = in_be32(&serdes2_base->bank[i].rstctl);
reg |= 0x20000000;
out_be32(&serdes2_base->bank[i].rstctl, reg);
} else {
udelay(1);
reg = in_be32(&serdes2_base->bank[i].rstctl);
reg &= 0xFFFFFFEF;
reg |= 0x00000040;
out_be32(&serdes2_base->bank[i].rstctl, reg);
udelay(1);
}
}
#endif
/* Take the all enabled lanes out of reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
reg = in_be32(&serdes1_base->lane[i].gcr0);
reg |= 0x00600000;
out_be32(&serdes1_base->lane[i].gcr0, reg);
}
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = cfg_rcw4 & FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
cfg_tmp >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
for (i = 0; i < 4 && cfg_tmp & (0xf << (3 - i)); i++) {
reg = in_be32(&serdes2_base->lane[i].gcr0);
reg |= 0x00600000;
out_be32(&serdes2_base->lane[i].gcr0, reg);
}
#endif
/* For each PLL being reset, and achieved PLL lock set RST_DONE */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = (cfg_rcw5 >> 22) & 0x3;
for (i = 0; i < 2; i++) {
reg = in_be32(&serdes1_base->bank[i].pllcr0);
if (!(cfg_tmp & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) {
reg = in_be32(&serdes1_base->bank[i].rstctl);
reg |= 0x40000000;
out_be32(&serdes1_base->bank[i].rstctl, reg);
}
}
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
cfg_tmp = (cfg_rcw5 >> 20) & 0x3;
for (i = 0; i < 2; i++) {
reg = in_be32(&serdes2_base->bank[i].pllcr0);
if (!(cfg_tmp & (0x1 << (1 - i))) && ((reg >> 23) & 0x1)) {
reg = in_be32(&serdes2_base->bank[i].rstctl);
reg |= 0x40000000;
out_be32(&serdes2_base->bank[i].rstctl, reg);
}
}
#endif
return ret;
}
void fsl_serdes_init(void)
{
#ifdef CONFIG_SYS_FSL_SRDS_1
serdes_init(FSL_SRDS_1,
CONFIG_SYS_FSL_SERDES_ADDR,
FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK,
FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT,
serdes1_prtcl_map);
#endif
#ifdef CONFIG_SYS_FSL_SRDS_2
serdes_init(FSL_SRDS_2,
CONFIG_SYS_FSL_SERDES_ADDR,
FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK,
FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT,
serdes2_prtcl_map);
#endif
}
|
