diff options
author | Masahiro Yamada <yamada.m@jp.panasonic.com> | 2014-02-21 00:55:16 (GMT) |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-03-10 15:38:13 (GMT) |
commit | ba650e9b5263bfc7579e6775676441eeeca2edc4 (patch) | |
tree | fe38a8aef9e8df147b16b3012c774e6b01dbd00a /include/configs/idmr.h | |
parent | 247161b8160fc699b0a517f081220bb50bc502a8 (diff) | |
download | u-boot-fsl-qoriq-ba650e9b5263bfc7579e6775676441eeeca2edc4.tar.xz |
m68k: Remove M5271EVB and idmr board support
CONFIG_SYS_HZ must be always 1000, but M5271EVB.h defines it
as 1000000 and idmr.h defines it as (50000000 / 64).
When compiling these two boards, a warning message is displayed:
time.c:14:2: warning: #warning "CONFIG_SYS_HZ must be 1000
and should not be defined by platforms" [-Wcpp]
There are no board maintainers for them so this commit just
deletes them.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Jason Jin <Jason.jin@freescale.com>
Diffstat (limited to 'include/configs/idmr.h')
-rw-r--r-- | include/configs/idmr.h | 240 |
1 files changed, 0 insertions, 240 deletions
diff --git a/include/configs/idmr.h b/include/configs/idmr.h deleted file mode 100644 index b882cf0..0000000 --- a/include/configs/idmr.h +++ /dev/null @@ -1,240 +0,0 @@ -/* - * Configuration settings for the iDMR board - * - * Based on MC5272C3, r5200 and M5271EVB board configs - * (C) Copyright 2006 Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com> - * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _IDMR_H -#define _IDMR_H - - -/* - * High Level Configuration Options (easy to change) - */ - -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5271 /* define processor type */ -#define CONFIG_IDMR /* define board type */ - -#undef CONFIG_WATCHDOG /* disable watchdog */ - -/* - * Default environment settings - */ -#define CONFIG_BOOTCOMMAND "run net_nfs" -#define CONFIG_BOOTDELAY 5 -#define CONFIG_MCFUART -#define CONFIG_SYS_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 -#define CONFIG_ETHADDR 00:06:3b:01:41:55 -#define CONFIG_ETHPRIME -#define CONFIG_IPADDR 192.168.30.1 -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_ROOTPATH "" -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_HOSTNAME idmr -#define CONFIG_BOOTFILE "/tftpboot/idmr/uImage" -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root " \ - "filesystem over NFS; echo" - -#define CONFIG_MCFTMR - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):" \ - "$(netmask):$(hostname):$(netdev):off panic=1\0" \ - "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;bootm $(kernel_addr) " \ - "$(ramdisk_addr)\0" \ - "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "ethact=FEC\0 " \ - "update=prot off ff800000 ff81ffff; era ff800000 ff81ffff; " \ - "cp.b 200000 ff800000 $(filesize);" \ - "prot on ff800000 ff81ffff\0" \ - "load=tftp 200000 $(u-boot)\0" \ - "u-boot=/tftpboot/idmr/u-boot.bin\0" \ - "" - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NET - -#undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_LOADB - - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/* - * Configuration for environment, which occupies third sector in flash. - */ -#ifndef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_ENV_ADDR 0xff820000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_IS_IN_FLASH -#else /* CONFIG_MONITOR_IS_IN_RAM */ -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#define CONFIG_ENV_IS_IN_FLASH -#endif /* !CONFIG_MONITOR_IS_IN_RAM */ - -#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -#define CONFIG_SYS_MEMTEST_START 0x400 -#define CONFIG_SYS_MEMTEST_END 0x380000 - -#define CONFIG_SYS_HZ (50000000 / 64) -#define CONFIG_SYS_CLK 100000000 - -#define CONFIG_SYS_MBAR 0x40000000 /* Register Base Addrs */ - -/* - * Ethernet - */ -#define CONFIG_MCFFEC -#ifdef CONFIG_MCFFEC -# define CONFIG_MII 1 -# define CONFIG_MII_INIT 1 -# define CONFIG_SYS_DISCOVER_PHY -# define CONFIG_SYS_RX_ETH_BUFFER 8 -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN - -# define CONFIG_SYS_FEC0_PINMUX 0 -# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE -# define MCFFEC_TOUT_LOOP 50000 -/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ -# ifndef CONFIG_SYS_DISCOVER_PHY -# define FECDUPLEX FULL -# define FECSPEED _100BASET -# else -# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN -# endif -# endif /* CONFIG_SYS_DISCOVER_PHY */ -#endif - -/* - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE 0xff800000 - -#ifdef CONFIG_MONITOR_IS_IN_RAM -#define CONFIG_SYS_MONITOR_BASE 0x20000 -#else /* !CONFIG_MONITOR_IS_IN_RAM */ -#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) -#endif /* CONFIG_MONITOR_IS_IN_RAM */ - -#define CONFIG_SYS_MONITOR_LEN 0x20000 -#define CONFIG_SYS_MALLOC_LEN (256 << 10) -#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024) - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization ?? - */ -#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) - -/* FLASH organization */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 1000 - -#define CONFIG_SYS_FLASH_SIZE 0x800000 -/* - * #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - */ - -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ - CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ - CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ - CF_CACR_DISD | CF_CACR_INVI | \ - CF_CACR_CEIB | CF_CACR_DCM | \ - CF_CACR_EUSP) - -/* Port configuration */ -#define CONFIG_SYS_FECI2C 0xF0 - - -/* Dynamic MTD partition support */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=idmr-0" - -#define MTDPARTS_DEFAULT "mtdparts=idmr-0:128k(u-boot)," \ - "64k(env)," \ - "640k(kernel)," \ - "2m(rootfs)," \ - "-(user)"; - -#if defined(CONFIG_CMD_MII) -#error "MII commands don't work on iDMR board and should not be enabled." -#endif - -#endif /* _IDMR_H */ |