summaryrefslogtreecommitdiff
path: root/include/configs/idmr.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/idmr.h')
-rw-r--r--include/configs/idmr.h240
1 files changed, 0 insertions, 240 deletions
diff --git a/include/configs/idmr.h b/include/configs/idmr.h
deleted file mode 100644
index b882cf0..0000000
--- a/include/configs/idmr.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- * Configuration settings for the iDMR board
- *
- * Based on MC5272C3, r5200 and M5271EVB board configs
- * (C) Copyright 2006 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com>
- * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _IDMR_H
-#define _IDMR_H
-
-
-/*
- * High Level Configuration Options (easy to change)
- */
-
-#define CONFIG_MCF52x2 /* define processor family */
-#define CONFIG_M5271 /* define processor type */
-#define CONFIG_IDMR /* define board type */
-
-#undef CONFIG_WATCHDOG /* disable watchdog */
-
-/*
- * Default environment settings
- */
-#define CONFIG_BOOTCOMMAND "run net_nfs"
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 19200
-#define CONFIG_ETHADDR 00:06:3b:01:41:55
-#define CONFIG_ETHPRIME
-#define CONFIG_IPADDR 192.168.30.1
-#define CONFIG_SERVERIP 192.168.1.1
-#define CONFIG_ROOTPATH ""
-#define CONFIG_GATEWAYIP 192.168.1.1
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_HOSTNAME idmr
-#define CONFIG_BOOTFILE "/tftpboot/idmr/uImage"
-#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root " \
- "filesystem over NFS; echo"
-
-#define CONFIG_MCFTMR
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs $(bootargs) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):" \
- "$(netmask):$(hostname):$(netdev):off panic=1\0" \
- "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
- "flash_self=run ramargs addip;bootm $(kernel_addr) " \
- "$(ramdisk_addr)\0" \
- "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$(serverip):$(rootpath)\0" \
- "ethact=FEC\0 " \
- "update=prot off ff800000 ff81ffff; era ff800000 ff81ffff; " \
- "cp.b 200000 ff800000 $(filesize);" \
- "prot on ff800000 ff81ffff\0" \
- "load=tftp 200000 $(u-boot)\0" \
- "u-boot=/tftpboot/idmr/u-boot.bin\0" \
- ""
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NET
-
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADB
-
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*
- * Configuration for environment, which occupies third sector in flash.
- */
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_ADDR 0xff820000
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_IS_IN_FLASH
-#else /* CONFIG_MONITOR_IS_IN_RAM */
-#define CONFIG_ENV_OFFSET 0x4000
-#define CONFIG_ENV_SECT_SIZE 0x2000
-#define CONFIG_ENV_IS_IN_FLASH
-#endif /* !CONFIG_MONITOR_IS_IN_RAM */
-
-#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
-#define CONFIG_SYS_MEMTEST_START 0x400
-#define CONFIG_SYS_MEMTEST_END 0x380000
-
-#define CONFIG_SYS_HZ (50000000 / 64)
-#define CONFIG_SYS_CLK 100000000
-
-#define CONFIG_SYS_MBAR 0x40000000 /* Register Base Addrs */
-
-/*
- * Ethernet
- */
-#define CONFIG_MCFFEC
-#ifdef CONFIG_MCFFEC
-# define CONFIG_MII 1
-# define CONFIG_MII_INIT 1
-# define CONFIG_SYS_DISCOVER_PHY
-# define CONFIG_SYS_RX_ETH_BUFFER 8
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-# define CONFIG_SYS_FEC0_PINMUX 0
-# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
-# define MCFFEC_TOUT_LOOP 50000
-/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
-# ifndef CONFIG_SYS_DISCOVER_PHY
-# define FECDUPLEX FULL
-# define FECSPEED _100BASET
-# else
-# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# endif
-# endif /* CONFIG_SYS_DISCOVER_PHY */
-#endif
-
-/*
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE 0xff800000
-
-#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE 0x20000
-#else /* !CONFIG_MONITOR_IS_IN_RAM */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
-#endif /* CONFIG_MONITOR_IS_IN_RAM */
-
-#define CONFIG_SYS_MONITOR_LEN 0x20000
-#define CONFIG_SYS_MALLOC_LEN (256 << 10)
-#define CONFIG_SYS_BOOTPARAMS_LEN (64*1024)
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization ??
- */
-#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
-
-/* FLASH organization */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
-
-#define CONFIG_SYS_FLASH_SIZE 0x800000
-/*
- * #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
- */
-
-/* Cache Configuration */
-#define CONFIG_SYS_CACHELINE_SIZE 16
-
-#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI)
-#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
- CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
- CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \
- CF_CACR_DISD | CF_CACR_INVI | \
- CF_CACR_CEIB | CF_CACR_DCM | \
- CF_CACR_EUSP)
-
-/* Port configuration */
-#define CONFIG_SYS_FECI2C 0xF0
-
-
-/* Dynamic MTD partition support */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=idmr-0"
-
-#define MTDPARTS_DEFAULT "mtdparts=idmr-0:128k(u-boot)," \
- "64k(env)," \
- "640k(kernel)," \
- "2m(rootfs)," \
- "-(user)";
-
-#if defined(CONFIG_CMD_MII)
-#error "MII commands don't work on iDMR board and should not be enabled."
-#endif
-
-#endif /* _IDMR_H */