diff options
author | Andy Fleming <afleming@freescale.com> | 2013-03-30 00:10:12 (GMT) |
---|---|---|
committer | Emil Medve <Emilian.Medve@Freescale.com> | 2013-04-02 09:48:02 (GMT) |
commit | 03f8008a6a6e45015dddeada9d23ef949e98b6d3 (patch) | |
tree | ab75bcf3acad4314aaea8b671f83e4e4b18128aa /arch/powerpc/boot | |
parent | 04ed5aa4a400dea723187b3668aa5cf57bdb8737 (diff) | |
download | linux-fsl-qoriq-03f8008a6a6e45015dddeada9d23ef949e98b6d3.tar.xz |
powerpc: Update device trees to support DPAA
The Datapath Acceleration Architecture devices are added to
the SOCs which make use of them. Compile-tested only.
The big changes from 1.3:
1) PAMU support now updated in each device to reflect new
architecture which specifies the PAMU topology.
2) Virtual MDIO drivers are now specified using the new
generic architecture.
Signed-off-by: Andy Fleming <afleming@freescale.com>
Change-Id: Id287a528bf94067aa60f721916462f0797161d89
Reviewed-on: http://git.am.freescale.net:8181/911
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Diffstat (limited to 'arch/powerpc/boot')
21 files changed, 2443 insertions, 56 deletions
diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi index 2f0ed36..3344f9a 100644 --- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -1,7 +1,7 @@ /* * P1023/P1017 Silicon/SoC Device Tree Source (post include) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -289,4 +289,123 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + + fman0: fman@100000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman", "simple-bus"; + ranges = <0 0x100000 0x100000>; + reg = <0x100000 0x100000>; + clock-frequency = <0>; + interrupts = < + 24 2 0 0 + 16 2 0 0>; + cc@0 { + compatible = "fsl,fman-cc"; + }; + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x10000>; + }; + bmi@80000 { + compatible = "fsl,fman-bmi"; + reg = <0x80000 0x400>; + }; + qmi@80400 { + compatible = "fsl,fman-qmi"; + reg = <0x80400 0x400>; + }; + policer@c0000 { + compatible = "fsl,fman-policer"; + reg = <0xc0000 0x1000>; + }; + keygen@c1000 { + compatible = "fsl,fman-keygen"; + reg = <0xc1000 0x1000>; + }; + dma@c2000 { + compatible = "fsl,fman-dma"; + reg = <0xc2000 0x1000>; + }; + fpm@c3000 { + compatible = "fsl,fman-fpm"; + reg = <0xc3000 0x1000>; + }; + parser@c7000 { + compatible = "fsl,fman-parser"; + reg = <0xc7000 0x1000>; + }; + fman0_rx0: port@88000 { + cell-index = <0>; + compatible = "fsl,fman-port-1g-rx"; + reg = <0x88000 0x1000>; + }; + fman0_rx1: port@89000 { + cell-index = <1>; + compatible = "fsl,fman-port-1g-rx"; + reg = <0x89000 0x1000>; + }; + fman0_tx0: port@a8000 { + cell-index = <0>; + compatible = "fsl,fman-port-1g-tx"; + reg = <0xa8000 0x1000>; + fsl,qman-channel-id = <0x40>; + }; + fman0_tx1: port@a9000 { + cell-index = <1>; + compatible = "fsl,fman-port-1g-tx"; + reg = <0xa9000 0x1000>; + fsl,qman-channel-id = <0x41>; + }; + fman0_oh1: port@82000 { + cell-index = <1>; + compatible = "fsl,fman-port-oh"; + reg = <0x82000 0x1000>; + fsl,qman-channel-id = <0x43>; + }; + fman0_oh2: port@83000 { + cell-index = <2>; + compatible = "fsl,fman-port-oh"; + reg = <0x83000 0x1000>; + fsl,qman-channel-id = <0x44>; + }; + fman0_oh3: port@84000 { + cell-index = <3>; + compatible = "fsl,fman-port-oh"; + reg = <0x84000 0x1000>; + fsl,qman-channel-id = <0x45>; + }; + fman0_oh4: port@85000 { + cell-index = <4>; + compatible = "fsl,fman-port-oh"; + reg = <0x85000 0x1000>; + fsl,qman-channel-id = <0x46>; + }; + enet0: ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-1g-mac"; + reg = <0xe0000 0x1000>; + fsl,port-handles = <&fman0_rx0 &fman0_tx0>; + ptimer-handle = <&ptp_timer0>; + }; + enet1: ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-1g-mac"; + reg = <0xe2000 0x1000>; + fsl,port-handles = <&fman0_rx1 &fman0_tx1>; + ptimer-handle = <&ptp_timer0>; + }; + mdio0: mdio@e1120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe1120 0xee0>; + interrupts = <26 1 0 0>; + }; + ptp_timer0: rtc@fe000 { + compatible = "fsl,fman-rtc"; + reg = <0xfe000 0x1000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi index 398df70..d07fdc2 100644 --- a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi @@ -61,6 +61,7 @@ qman = &qman; bman = &bman; + fman0 = &fman0; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 217bb41..2c8881e 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -423,6 +423,10 @@ /include/ "qoriq-duart-0.dtsi" /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-rman-0.dtsi" + rman: rman@1e0000 { + fsl,qman-channels-id = <0x62 0x63>; + }; /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; @@ -431,7 +435,6 @@ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ port0; }; - /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; @@ -440,29 +443,78 @@ dr_mode = "host"; phy_type = "utmi"; }; - /include/ "qoriq-sata2-0.dtsi" sata@220000 { fsl,iommu-parent = <&pamu1>; fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ }; - /include/ "qoriq-sata2-1.dtsi" sata@221000 { fsl,iommu-parent = <&pamu1>; fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ }; - /include/ "qoriq-sec4.2-0.dtsi" -crypto: crypto@300000 { + crypto: crypto@300000 { fsl,iommu-parent = <&pamu1>; }; - +/include/ "qoriq-pme-0.dtsi" /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" - -/include/ "qoriq-rman-0.dtsi" - rman: rman@1e0000 { - fsl,qman-channels-id = <0x62 0x63>; +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman0: fman@400000 { + /* tx - 1g - 0 */ + port@a8000 { + fsl,qman-channel-id = <0x41>; + }; + /* tx - 1g - 1 */ + port@a9000 { + fsl,qman-channel-id = <0x42>; + }; + /* tx - 1g - 2 */ + port@aa000 { + fsl,qman-channel-id = <0x43>; + }; + /* tx - 1g - 3 */ + port@ab000 { + fsl,qman-channel-id = <0x44>; + }; + /* tx - 1g - 4 */ + port@ac000 { + fsl,qman-channel-id = <0x45>; + }; + /* tx - 10g - 0 */ + port@b0000 { + fsl,qman-channel-id = <0x40>; + }; + /* offline 0 */ + port@81000 { + fsl,qman-channel-id = <0x46>; + }; + /* offline 1 */ + port@82000 { + fsl,qman-channel-id = <0x47>; + }; + /* offline 2 */ + port@83000 { + fsl,qman-channel-id = <0x48>; + }; + /* offline 3 */ + port@84000 { + fsl,qman-channel-id = <0x49>; + }; + /* offline 4 */ + port@85000 { + fsl,qman-channel-id = <0x4a>; + }; + /* offline 5 */ + port@86000 { + fsl,qman-channel-id = <0x4b>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi index 5eee654..9c2c945 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi @@ -73,8 +73,11 @@ rtic_d = &rtic_d; sec_mon = &sec_mon; + rman = &rman; + pme = &pme; qman = &qman; bman = &bman; + fman0 = &fman0; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index 20a241c0..a920414 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -450,6 +450,10 @@ /include/ "qoriq-duart-0.dtsi" /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-rman-0.dtsi" + rman: rman@1e0000 { + fsl,qman-channels-id = <0x62 0x63>; + }; /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph"; @@ -458,7 +462,6 @@ fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ port0; }; - /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; @@ -467,29 +470,78 @@ dr_mode = "host"; phy_type = "utmi"; }; - /include/ "qoriq-sata2-0.dtsi" sata@220000 { fsl,iommu-parent = <&pamu1>; fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ }; - /include/ "qoriq-sata2-1.dtsi" sata@221000 { fsl,iommu-parent = <&pamu1>; fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ }; - /include/ "qoriq-sec4.2-0.dtsi" crypto: crypto@300000 { fsl,iommu-parent = <&pamu1>; }; - +/include/ "qoriq-pme-0.dtsi" /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" - -/include/ "qoriq-rman-0.dtsi" - rman: rman@1e0000 { - fsl,qman-channels-id = <0x62 0x63>; +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman0: fman@400000 { + /* tx - 1g - 0 */ + port@a8000 { + fsl,qman-channel-id = <0x41>; + }; + /* tx - 1g - 1 */ + port@a9000 { + fsl,qman-channel-id = <0x42>; + }; + /* tx - 1g - 2 */ + port@aa000 { + fsl,qman-channel-id = <0x43>; + }; + /* tx - 1g - 3 */ + port@ab000 { + fsl,qman-channel-id = <0x44>; + }; + /* tx - 1g - 4 */ + port@ac000 { + fsl,qman-channel-id = <0x45>; + }; + /* tx - 10g - 0 */ + port@b0000 { + fsl,qman-channel-id = <0x40>; + }; + /* offline 0 */ + port@81000 { + fsl,qman-channel-id = <0x46>; + }; + /* offline 1 */ + port@82000 { + fsl,qman-channel-id = <0x47>; + }; + /* offline 2 */ + port@83000 { + fsl,qman-channel-id = <0x48>; + }; + /* offline 3 */ + port@84000 { + fsl,qman-channel-id = <0x49>; + }; + /* offline 4 */ + port@85000 { + fsl,qman-channel-id = <0x4a>; + }; + /* offline 5 */ + port@86000 { + fsl,qman-channel-id = <0x4b>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi index eb5a499..07a21d8 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi @@ -74,8 +74,11 @@ rtic_d = &rtic_d; sec_mon = &sec_mon; + rman = &rman; + pme = &pme; qman = &qman; bman = &bman; + fman0 = &fman0; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 3e0b4ec..23b20a7 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -525,8 +525,120 @@ /include/ "qoriq-sec4.0-0.dtsi" crypto: crypto@300000 { fsl,iommu-parent = <&pamu1>; - }; - +}; +/include/ "qoriq-pme-0.dtsi" /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman0: fman@400000 { + /* tx - 1g - 0 */ + port@a8000 { + fsl,qman-channel-id = <0x41>; + }; + /* tx - 1g - 1 */ + port@a9000 { + fsl,qman-channel-id = <0x42>; + }; + /* tx - 1g - 2 */ + port@aa000 { + fsl,qman-channel-id = <0x43>; + }; + /* tx - 1g - 3 */ + port@ab000 { + fsl,qman-channel-id = <0x44>; + }; + /* tx - 10g - 0 */ + port@b0000 { + fsl,qman-channel-id = <0x40>; + }; + /* offline 0 */ + port@81000 { + fsl,qman-channel-id = <0x45>; + }; + /* offline 1 */ + port@82000 { + fsl,qman-channel-id = <0x46>; + }; + /* offline 2 */ + port@83000 { + fsl,qman-channel-id = <0x47>; + }; + /* offline 3 */ + port@84000 { + fsl,qman-channel-id = <0x48>; + }; + /* offline 4 */ + port@85000 { + fsl,qman-channel-id = <0x49>; + }; + /* offline 5 */ + port@86000 { + fsl,qman-channel-id = <0x4a>; + }; + /* offline 6 */ + port@87000 { + fsl,qman-channel-id = <0x4b>; + }; + }; +/include/ "qoriq-fman-1.dtsi" +/include/ "qoriq-fman-1-1g-0.dtsi" +/include/ "qoriq-fman-1-1g-1.dtsi" +/include/ "qoriq-fman-1-1g-2.dtsi" +/include/ "qoriq-fman-1-1g-3.dtsi" +/include/ "qoriq-fman-1-10g-0.dtsi" + fman1: fman@500000 { + /* tx - 1g - 0 */ + port@a8000 { + fsl,qman-channel-id = <0x61>; + }; + /* tx - 1g - 1 */ + port@a9000 { + fsl,qman-channel-id = <0x62>; + }; + /* tx - 1g - 2 */ + port@aa000 { + fsl,qman-channel-id = <0x63>; + }; + /* tx - 1g - 3 */ + port@ab000 { + fsl,qman-channel-id = <0x64>; + }; + /* tx - 10g - 0 */ + port@b0000 { + fsl,qman-channel-id = <0x60>; + }; + /* offline 0 */ + port@81000 { + fsl,qman-channel-id = <0x65>; + }; + /* offline 1 */ + port@82000 { + fsl,qman-channel-id = <0x66>; + }; + /* offline 2 */ + port@83000 { + fsl,qman-channel-id = <0x67>; + }; + /* offline 3 */ + port@84000 { + fsl,qman-channel-id = <0x68>; + }; + /* offline 4 */ + port@85000 { + fsl,qman-channel-id = <0x69>; + }; + /* offline 5 */ + port@86000 { + fsl,qman-channel-id = <0x6a>; + }; + /* offline 6 */ + port@87000 { + fsl,qman-channel-id = <0x6b>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi index a4afea1..dee237a 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi @@ -73,8 +73,11 @@ rtic_d = &rtic_d; sec_mon = &sec_mon; + pme = &pme; qman = &qman; bman = &bman; + fman0 = &fman0; + fman1 = &fman1; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index 8946d0e..5fc2e4b 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -435,6 +435,10 @@ /include/ "qoriq-duart-0.dtsi" /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-rman-0.dtsi" + rman: rman@1e0000 { + fsl,qman-channels-id = <0x62 0x63>; + }; /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; @@ -443,7 +447,6 @@ phy_type = "utmi"; port0; }; - /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; @@ -452,13 +455,11 @@ dr_mode = "host"; phy_type = "utmi"; }; - /include/ "qoriq-sata2-0.dtsi" sata@220000 { fsl,iommu-parent = <&pamu1>; fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ }; - /include/ "qoriq-sata2-1.dtsi" sata@221000 { fsl,iommu-parent = <&pamu1>; @@ -468,17 +469,69 @@ crypto@300000 { fsl,iommu-parent = <&pamu1>; }; - -/include/ "qoriq-qman1.dtsi" -/include/ "qoriq-bman1.dtsi" - /include/ "qoriq-raid1.0-0.dtsi" raideng@320000 { fsl,iommu-parent = <&pamu1>; }; - -/include/ "qoriq-rman-0.dtsi" - rman: rman@1e0000 { - fsl,qman-channels-id = <0x62 0x63>; +/include/ "qoriq-pme-0.dtsi" +/include/ "qoriq-qman1.dtsi" +/include/ "qoriq-bman1.dtsi" +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman0: fman@400000 { + /* tx - 1g - 0 */ + port@a8000 { + fsl,qman-channel-id = <0x41>; + }; + /* tx - 1g - 1 */ + port@a9000 { + fsl,qman-channel-id = <0x42>; + }; + /* tx - 1g - 2 */ + port@aa000 { + fsl,qman-channel-id = <0x43>; + }; + /* tx - 1g - 3 */ + port@ab000 { + fsl,qman-channel-id = <0x44>; + }; + /* tx - 1g - 4 */ + port@ac000 { + fsl,qman-channel-id = <0x45>; + }; + /* tx - 10g - 0 */ + port@b0000 { + fsl,qman-channel-id = <0x40>; + }; + /* offline 0 */ + port@81000 { + fsl,qman-channel-id = <0x46>; + }; + /* offline 1 */ + port@82000 { + fsl,qman-channel-id = <0x47>; + }; + /* offline 2 */ + port@83000 { + fsl,qman-channel-id = <0x48>; + }; + /* offline 3 */ + port@84000 { + fsl,qman-channel-id = <0x49>; + }; + /* offline 4 */ + port@85000 { + fsl,qman-channel-id = <0x4a>; + }; + /* offline 5 */ + port@86000 { + fsl,qman-channel-id = <0x4b>; + }; }; +/include/ "qoriq-raid1.0-0.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi index 3cf83ff..ee4b45f 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -74,8 +74,11 @@ rtic_d = &rtic_d; sec_mon = &sec_mon; + rman = &rman; + pme = &pme; qman = &qman; bman = &bman; + fman0 = &fman0; raideng = &raideng; raideng_jr0 = &raideng_jr0; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index 820ed07..4a57371 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -415,7 +415,6 @@ phy_type = "utmi"; port0; }; - /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; @@ -424,24 +423,135 @@ dr_mode = "host"; phy_type = "utmi"; }; - /include/ "qoriq-sata2-0.dtsi" sata@220000 { fsl,iommu-parent = <&pamu4>; fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ }; - /include/ "qoriq-sata2-1.dtsi" sata@221000 { fsl,iommu-parent = <&pamu4>; fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ }; - /include/ "qoriq-sec5.2-0.dtsi" crypto@300000 { fsl,iommu-parent = <&pamu4>; }; - +/include/ "qoriq-raid1.0-0.dtsi" /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman0: fman@400000 { + /* tx - 1g - 0 */ + port@a8000 { + fsl,qman-channel-id = <0x41>; + }; + /* tx - 1g - 1 */ + port@a9000 { + fsl,qman-channel-id = <0x42>; + }; + /* tx - 1g - 2 */ + port@aa000 { + fsl,qman-channel-id = <0x43>; + }; + /* tx - 1g - 3 */ + port@ab000 { + fsl,qman-channel-id = <0x44>; + }; + /* tx - 1g - 4 */ + port@ac000 { + fsl,qman-channel-id = <0x45>; + }; + /* tx - 10g - 0 */ + port@b0000 { + fsl,qman-channel-id = <0x40>; + }; + /* offline 0 */ + port@81000 { + fsl,qman-channel-id = <0x46>; + }; + /* offline 1 */ + port@82000 { + fsl,qman-channel-id = <0x47>; + }; + /* offline 2 */ + port@83000 { + fsl,qman-channel-id = <0x48>; + }; + /* offline 3 */ + port@84000 { + fsl,qman-channel-id = <0x49>; + }; + /* offline 4 */ + port@85000 { + fsl,qman-channel-id = <0x4a>; + }; + /* offline 5 */ + port@86000 { + fsl,qman-channel-id = <0x4b>; + }; + }; +/include/ "qoriq-fman-1.dtsi" +/include/ "qoriq-fman-1-1g-0.dtsi" +/include/ "qoriq-fman-1-1g-1.dtsi" +/include/ "qoriq-fman-1-1g-2.dtsi" +/include/ "qoriq-fman-1-1g-3.dtsi" +/include/ "qoriq-fman-1-1g-4.dtsi" +/include/ "qoriq-fman-1-10g-0.dtsi" + fman1: fman@500000 { + /* tx - 1g - 0 */ + port@a8000 { + fsl,qman-channel-id = <0x61>; + }; + /* tx - 1g - 1 */ + port@a9000 { + fsl,qman-channel-id = <0x62>; + }; + /* tx - 1g - 2 */ + port@aa000 { + fsl,qman-channel-id = <0x63>; + }; + /* tx - 1g - 3 */ + port@ab000 { + fsl,qman-channel-id = <0x64>; + }; + /* tx - 1g - 4 */ + port@ac000 { + fsl,qman-channel-id = <0x65>; + }; + /* tx - 10g - 0 */ + port@b0000 { + fsl,qman-channel-id = <0x60>; + }; + /* offline 0 */ + port@81000 { + fsl,qman-channel-id = <0x66>; + }; + /* offline 1 */ + port@82000 { + fsl,qman-channel-id = <0x67>; + }; + /* offline 2 */ + port@83000 { + fsl,qman-channel-id = <0x68>; + }; + /* offline 3 */ + port@84000 { + fsl,qman-channel-id = <0x69>; + }; + /* offline 4 */ + port@85000 { + fsl,qman-channel-id = <0x6a>; + }; + /* offline 5 */ + port@86000 { + fsl,qman-channel-id = <0x6b>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi index a0a7129..33a37d1 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi @@ -73,8 +73,16 @@ rtic_d = &rtic_d; sec_mon = &sec_mon; + raideng = &raideng; + raideng_jr0 = &raideng_jr0; + raideng_jr1 = &raideng_jr1; + raideng_jr2 = &raideng_jr2; + raideng_jr3 = &raideng_jr3; + qman = &qman; bman = &bman; + fman0 = &fman0; + fman1 = &fman1; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index 9df6f83..d65e7e2 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -20,7 +20,7 @@ * Foundation, either version 2 of that License or (at your option) any * later version. * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY @@ -298,6 +298,10 @@ /include/ "qoriq-qman2-portals.dtsi" }; +&lportals { +/include/ "interlaken-lac-portals.dtsi" +}; + &soc { #address-cells = <1>; #size-cells = <1>; @@ -487,6 +491,10 @@ /include/ "qoriq-gpio-1.dtsi" /include/ "qoriq-gpio-2.dtsi" /include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-rman-0.dtsi" + rman: rman@1e0000 { + fsl,qman-channels-id = <0x880 0x881>; + }; /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph"; @@ -501,9 +509,146 @@ }; /include/ "qoriq-sata2-0.dtsi" /include/ "qoriq-sata2-1.dtsi" +/include/ "interlaken-lac.dtsi" /include/ "qoriq-sec5.0-0.dtsi" +/include/ "qoriq-dce-0.dtsi" +/include/ "qoriq-pme-0.dtsi" /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman0: fman@400000 { + /* tx - 1g - 0 */ + port@a8000 { + fsl,qman-channel-id = <0x802>; + }; + /* tx - 1g - 1 */ + port@a9000 { + fsl,qman-channel-id = <0x803>; + }; + /* tx - 1g - 2 */ + port@aa000 { + fsl,qman-channel-id = <0x804>; + }; + /* tx - 1g - 3 */ + port@ab000 { + fsl,qman-channel-id = <0x805>; + }; + /* tx - 1g - 4 */ + port@ac000 { + fsl,qman-channel-id = <0x806>; + }; + /* tx - 1g - 5 */ + port@ad000 { + fsl,qman-channel-id = <0x807>; + }; + /* tx - 10g - 0 */ + port@b0000 { + fsl,qman-channel-id = <0x800>; + }; + /* tx - 10g - 1 */ + port@b1000 { + fsl,qman-channel-id = <0x801>; + }; + /* offline - 1 */ + port@82000 { + fsl,qman-channel-id = <0x809>; + }; + /* offline - 2 */ + port@83000 { + fsl,qman-channel-id = <0x80a>; + }; + /* offline - 3 */ + port@84000 { + fsl,qman-channel-id = <0x80b>; + }; + /* offline - 4 */ + port@85000 { + fsl,qman-channel-id = <0x80c>; + }; + /* offline - 5 */ + port@86000 { + fsl,qman-channel-id = <0x80d>; + }; + /* offline - 6 */ + port@87000 { + fsl,qman-channel-id = <0x80e>; + }; + }; +/include/ "qoriq-fman3-1.dtsi" +/include/ "qoriq-fman3-1-1g-0.dtsi" +/include/ "qoriq-fman3-1-1g-1.dtsi" +/include/ "qoriq-fman3-1-1g-2.dtsi" +/include/ "qoriq-fman3-1-1g-3.dtsi" +/include/ "qoriq-fman3-1-1g-4.dtsi" +/include/ "qoriq-fman3-1-1g-5.dtsi" +/include/ "qoriq-fman3-1-10g-0.dtsi" +/include/ "qoriq-fman3-1-10g-1.dtsi" + fman1: fman@500000 { + /* tx - 1g - 0 */ + port@a8000 { + fsl,qman-channel-id = <0x822>; + }; + /* tx - 1g - 1 */ + port@a9000 { + fsl,qman-channel-id = <0x823>; + }; + /* tx - 1g - 2 */ + port@aa000 { + fsl,qman-channel-id = <0x824>; + }; + /* tx - 1g - 3 */ + port@ab000 { + fsl,qman-channel-id = <0x825>; + }; + /* tx - 1g - 4 */ + port@ac000 { + fsl,qman-channel-id = <0x826>; + }; + /* tx - 1g - 5 */ + port@ad000 { + fsl,qman-channel-id = <0x827>; + }; + /* tx - 10g - 0 */ + port@b0000 { + fsl,qman-channel-id = <0x820>; + }; + /* tx - 10g - 1 */ + port@b1000 { + fsl,qman-channel-id = <0x821>; + }; + /* offline - 1 */ + port@82000 { + fsl,qman-channel-id = <0x829>; + }; + /* offline - 2 */ + port@83000 { + fsl,qman-channel-id = <0x82a>; + }; + /* offline - 3 */ + port@84000 { + fsl,qman-channel-id = <0x82b>; + }; + /* offline - 4 */ + port@85000 { + fsl,qman-channel-id = <0x82c>; + }; + /* offline - 5 */ + port@86000 { + fsl,qman-channel-id = <0x82d>; + }; + /* offline - 6 */ + port@87000 { + fsl,qman-channel-id = <0x82e>; + }; + }; L2_1: l2-cache-controller@c20000 { compatible = "fsl,t4240-l2-cache-controller"; @@ -520,9 +665,4 @@ reg = <0xca0000 0x40000>; next-level-cache = <&cpc>; }; - -/include/ "qoriq-rman-0.dtsi" - rman: rman@1e0000 { - fsl,qman-channels-id = <0x880 0x881>; - }; }; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi index 590e487..07dba1d 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi @@ -20,7 +20,7 @@ * Foundation, either version 2 of that License or (at your option) any * later version. * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY @@ -50,7 +50,33 @@ serial1 = &serial1; serial2 = &serial2; serial3 = &serial3; + + rman = &rman; + lac = &lac; crypto = &crypto; + dce = &dce; + pme = &pme; + qman = &qman; + bman = &bman; + fman0 = &fman0; + fman1 = &fman1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; + ethernet10 = &enet10; + ethernet11 = &enet11; + ethernet12 = &enet12; + ethernet13 = &enet13; + ethernet14 = &enet14; + ethernet15 = &enet15; + pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; @@ -58,15 +84,17 @@ dma0 = &dma0; dma1 = &dma1; sdhc = &sdhc; - - qman = &qman; - bman = &bman; }; cpus { #address-cells = <1>; #size-cells = <0>; + /* + * Temporarily add next-level-cache info in each cpu node so + * that uboot can do L2 cache fixup. This can be removed once + * u-boot can create cpu node with cache info. + */ cpu0: PowerPC,e6500@0 { device_type = "cpu"; reg = <0 1>; @@ -91,6 +119,7 @@ clocks = <&mux0>; next-level-cache = <&L2_1>; }; + cpu4: PowerPC,e6500@4 { device_type = "cpu"; reg = <8 9>; @@ -115,6 +144,7 @@ clocks = <&mux1>; next-level-cache = <&L2_2>; }; + cpu8: PowerPC,e6500@8 { device_type = "cpu"; reg = <16 17>; diff --git a/arch/powerpc/boot/dts/p1023rds.dts b/arch/powerpc/boot/dts/p1023rds.dts index e896155..5888f3d 100644 --- a/arch/powerpc/boot/dts/p1023rds.dts +++ b/arch/powerpc/boot/dts/p1023rds.dts @@ -1,7 +1,7 @@ /* * P1023 RDS Device Tree Source * - * Copyright 2010-2011 Freescale Semiconductor Inc. + * Copyright 2010-2012 Freescale Semiconductor Inc. * * Author: Roy Zang <tie-fei.zang@freescale.com> * @@ -43,6 +43,11 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + }; + memory { device_type = "memory"; }; @@ -91,6 +96,25 @@ dr_mode = "host"; phy_type = "ulpi"; }; + + fman0: fman@100000 { + enet0: ethernet@e0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii"; + }; + enet1: ethernet@e2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii"; + }; + mdio0: mdio@e1120 { + phy0: ethernet-phy@2 { + reg = <0x02>; + }; + phy1: ethernet-phy@7 { + reg = <0x07>; + }; + }; + }; }; lbc: localbus@ff605000 { @@ -222,6 +246,19 @@ 0x0 0x100000>; }; }; + + fsl,dpaa { + compatible = "fsl,p1023-dpaa", "fsl,dpaa"; + + ethernet@0 { + compatible = "fsl,p1023-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet0>; + }; + ethernet@1 { + compatible = "fsl,p1023-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet1>; + }; + }; }; /include/ "fsl/p1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts index 774c9f7..9412879 100644 --- a/arch/powerpc/boot/dts/p2041rdb.dts +++ b/arch/powerpc/boot/dts/p2041rdb.dts @@ -1,7 +1,7 @@ /* * P2041RDB Device Tree Source * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,25 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_2 = &phy_sgmii_2; + phy_sgmii_3 = &phy_sgmii_3; + phy_sgmii_4 = &phy_sgmii_4; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_2 = &phy_xgmii_2; + }; + memory { device_type = "memory"; }; @@ -118,6 +137,117 @@ usb1: usb@211000 { dr_mode = "host"; }; + + fman0: fman@400000 { + enet0: ethernet@e0000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + mdio0: mdio@e1120 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + phy_sgmii_2: ethernet-phy@2 { + reg = <0x2>; + }; + phy_sgmii_3: ethernet-phy@3 { + reg = <0x3>; + }; + phy_sgmii_4: ethernet-phy@4 { + reg = <0x4>; + }; + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + enet1: ethernet@e2000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy_sgmii_3>; + phy-connection-type = "sgmii"; + }; + + mdio@e3120 { + tbi1: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@e4000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy_sgmii_4>; + phy-connection-type = "sgmii"; + }; + + mdio@e5120 { + tbi2: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@e6000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + mdio@e7120 { + tbi3: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet4: ethernet@e8000 { + tbi-handle = <&tbi4>; + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + mdio@e9120 { + tbi4: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet5: ethernet@f0000 { + /* + * phy-handle will be updated by U-Boot to + * reflect the actual slot the XAUI card is in. + */ + phy-handle = <&phy_xgmii_2>; + phy-connection-type = "xgmii"; + }; + + mdio@f1000 { + /* XAUI card in slot 2 */ + phy_xgmii_2: ethernet-phy@0 { + reg = <0x0>; + }; + }; + }; }; rio: rapidio@ffe0c0000 { @@ -226,6 +356,35 @@ 0 0x00010000>; }; }; + + fsl,dpaa { + compatible = "fsl,p2041-dpaa", "fsl,dpaa"; + + ethernet@0 { + compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet0>; + }; + ethernet@1 { + compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet1>; + }; + ethernet@2 { + compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet2>; + }; + ethernet@3 { + compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet3>; + }; + ethernet@4 { + compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet4>; + }; + ethernet@5 { + compatible = "fsl,p2041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet5>; + }; + }; }; /include/ "fsl/p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts index 61557ec..276bb49 100644 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -1,7 +1,7 @@ /* * P3041DS Device Tree Source * - * Copyright 2010-2011 Freescale Semiconductor Inc. + * Copyright 2010-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,26 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_1 = &phy_xgmii_1; + phy_xgmii_2 = &phy_xgmii_2; + emi1_rgmii = &hydra_mdio_rgmii; + emi1_sgmii = &hydra_mdio_sgmii; + emi2_xgmii = &hydra_mdio_xgmii; + }; + memory { device_type = "memory"; }; @@ -111,6 +131,110 @@ reg = <0x4c>; }; }; + + fman0: fman@400000 { + enet0: ethernet@e0000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + mdio0: mdio@e1120 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@e2000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + mdio@e3120 { + tbi1: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@e4000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + mdio@e5120 { + tbi2: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@e6000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-tbi"; + reg = <0xe7120 0xee0>; + interrupts = <100 1 0 0>; + + tbi3: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet4: ethernet@e8000 { + tbi-handle = <&tbi4>; + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + mdio@e9120 { + tbi4: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet5: ethernet@f0000 { + /* + * phy-handle will be updated by U-Boot to + * reflect the actual slot the XAUI card is in. + */ + phy-handle = <&phy_xgmii_1>; + phy-connection-type = "xgmii"; + }; + + /* + * We only support one XAUI card, so the MDIO muxing + * is set by U-Boot, and Linux never touches it. + * Therefore, we don't need a virtual MDIO node. + * However, the phy address depends on the slot, so + * only one of the ethernet-phy nodes below will be + * used. + */ + hydra_mdio_xgmii: mdio@f1000 { + status = "disabled"; + + /* XAUI card in slot 1 */ + phy_xgmii_1: ethernet-phy@4 { + reg = <0x4>; + }; + + /* XAUI card in slot 2 */ + phy_xgmii_2: ethernet-phy@0 { + reg = <0x0>; + }; + }; + }; }; rio: rapidio@ffe0c0000 { @@ -176,8 +300,66 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis"; reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <9 1>; // BRDCFG1 + mux-mask = <0x78>; // EMI1 + + /* + * Virtual MDIO for the two on-board RGMII + * ports. The reg property is already correct. + */ + hydra_mdio_rgmii: rgmii-mdio@8 { + status = "disabled"; + reg = <8>; /* EMI1_EN | 0 */ + #address-cells = <1>; + #size-cells = <0>; + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + /* + * Virtual MDIO for the four-port SGMII card. + * The reg property will be fixed-up + * by U-Boot based on the slot that + * the SGMII card is in. + * + * Note: we do not support DTSEC5 connected to + * SGMII, so this is the only SGMII node. + */ + hydra_mdio_sgmii: sgmii-mdio@28 { + reg = <0x28>; /* EMI1_EN | 0x20 */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; }; @@ -240,6 +422,36 @@ 0 0x00010000>; }; }; + + fsl,dpaa { + compatible = "fsl,p3041-dpaa", "fsl,dpaa"; + + ethernet@0 { + compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet0>; + }; + ethernet@1 { + compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet1>; + }; + ethernet@2 { + compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet2>; + status = "disabled"; + }; + ethernet@3 { + compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet3>; + }; + ethernet@4 { + compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet4>; + }; + ethernet@5 { + compatible = "fsl,p3041-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet5>; + }; + }; }; /include/ "fsl/p3041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index 839c0bd..e7dd754 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -1,7 +1,7 @@ /* * P4080DS Device Tree Source * - * Copyright 2009-2011 Freescale Semiconductor Inc. + * Copyright 2009-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,30 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; + phy_rgmii = &phyrgmii; + phy5_slot3 = &phy5slot3; + phy6_slot3 = &phy6slot3; + phy7_slot3 = &phy7slot3; + phy8_slot3 = &phy8slot3; + emi1_slot3 = &p4080mdio2; + emi1_slot4 = &p4080mdio1; + emi1_slot5 = &p4080mdio3; + emi1_rgmii = &p4080mdio0; + emi2_slot4 = &p4080xmdio1; + emi2_slot5 = &p4080xmdio3; + }; + memory { device_type = "memory"; }; @@ -118,6 +142,125 @@ dr_mode = "host"; phy_type = "ulpi"; }; + + fman0: fman@400000 { + enet0: ethernet@e0000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + mdio0: mdio@e1120 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@e2000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + }; + + mdio@e3120 { + tbi1: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@e4000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + }; + + mdio@e5120 { + tbi2: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@e6000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + }; + + mdio@e7120 { + tbi3: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + enet4: ethernet@f0000 { + phy-handle = <&phy10>; + phy-connection-type = "xgmii"; + }; + + xmdio0: mdio@f1000 { + }; + }; + + fman1: fman@500000 { + enet5: ethernet@e0000 { + tbi-handle = <&tbi5>; + phy-handle = <&phy5>; + phy-connection-type = "sgmii"; + }; + mdio@e1120 { + tbi5: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet6: ethernet@e2000 { + tbi-handle = <&tbi6>; + phy-handle = <&phy6>; + phy-connection-type = "sgmii"; + }; + + mdio@e3120 { + tbi6: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet7: ethernet@e4000 { + tbi-handle = <&tbi7>; + phy-handle = <&phy7>; + phy-connection-type = "sgmii"; + }; + + mdio@e5120 { + tbi7: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet8: ethernet@e6000 { + tbi-handle = <&tbi8>; + phy-handle = <&phy8>; + phy-connection-type = "sgmii"; + }; + + mdio@e7120 { + tbi8: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet9: ethernet@f0000 { + phy-handle = <&phy11>; + phy-connection-type = "xgmii"; + }; + }; }; rio: rapidio@ffe0c0000 { @@ -194,6 +337,152 @@ }; }; + mdio-mux-emi1 { + compatible = "mdio-mux-gpio"; + gpios = <&gpio0 0 0>, <&gpio0 1 0>; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + p4080mdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phyrgmii: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + p4080mdio1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@1c { + reg = <0x1c>; + }; + phy6: ethernet-phy@1d { + reg = <0x1d>; + }; + phy7: ethernet-phy@1e { + reg = <0x1e>; + }; + phy8: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + p4080mdio2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy5slot3: ethernet-phy@1c { + reg = <0x1c>; + }; + phy6slot3: ethernet-phy@1d { + reg = <0x1d>; + }; + phy7slot3: ethernet-phy@1e { + reg = <0x1e>; + }; + phy8slot3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + p4080mdio3: mdio@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@1c { + reg = <0x1c>; + }; + phy1: ethernet-phy@1d { + reg = <0x1d>; + }; + phy2: ethernet-phy@1e { + reg = <0x1e>; + }; + phy3: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + mdio-mux-emi2 { + compatible = "mdio-mux-gpio"; + gpios = <&gpio0 2 0>, <&gpio0 3 0>; + mdio-parent-bus = <&xmdio0>; + #address-cells = <1>; + #size-cells = <0>; + + p4080xmdio1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + phy11: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + p4080xmdio3: mdio@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + phy10: ethernet-phy@4 { + reg = <0x4>; + }; + }; + }; + fsl,dpaa { + compatible = "fsl,p4080-dpaa", "fsl,dpaa"; + + ethernet@0 { + compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet0>; + }; + ethernet@1 { + compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet1>; + }; + ethernet@2 { + compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet2>; + }; + ethernet@3 { + compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet3>; + }; + ethernet@4 { + compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet4>; + }; + ethernet@5 { + compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet5>; + }; + ethernet@6 { + compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet6>; + }; + ethernet@7 { + compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet7>; + }; + ethernet@8 { + compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet8>; + }; + ethernet@9 { + compatible = "fsl,p4080-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet9>; + }; + }; }; /include/ "fsl/p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts index 334ae9c..384461d 100644 --- a/arch/powerpc/boot/dts/p5020ds.dts +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -1,7 +1,7 @@ /* * P5020DS Device Tree Source * - * Copyright 2010-2011 Freescale Semiconductor Inc. + * Copyright 2010-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,26 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + phy_rgmii_0 = &phy_rgmii_0; + phy_rgmii_1 = &phy_rgmii_1; + phy_sgmii_1c = &phy_sgmii_1c; + phy_sgmii_1d = &phy_sgmii_1d; + phy_sgmii_1e = &phy_sgmii_1e; + phy_sgmii_1f = &phy_sgmii_1f; + phy_xgmii_1 = &phy_xgmii_1; + phy_xgmii_2 = &phy_xgmii_2; + emi1_rgmii = &hydra_mdio_rgmii; + emi1_sgmii = &hydra_mdio_sgmii; + emi2_xgmii = &hydra_mdio_xgmii; + }; + memory { device_type = "memory"; }; @@ -111,6 +131,110 @@ reg = <0x4c>; }; }; + + fman0: fman@400000 { + enet0: ethernet@e0000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy_sgmii_1c>; + phy-connection-type = "sgmii"; + }; + + mdio0: mdio@e1120 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@e2000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy_sgmii_1d>; + phy-connection-type = "sgmii"; + }; + + mdio@e3120 { + tbi1: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@e4000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy_sgmii_1e>; + phy-connection-type = "sgmii"; + }; + + mdio@e5120 { + tbi2: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@e6000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy_sgmii_1f>; + phy-connection-type = "sgmii"; + }; + + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-tbi"; + reg = <0xe7120 0xee0>; + interrupts = <100 1 0 0>; + + tbi3: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet4: ethernet@e8000 { + tbi-handle = <&tbi4>; + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + mdio@e9120 { + tbi4: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + enet5: ethernet@f0000 { + /* + * phy-handle will be updated by U-Boot to + * reflect the actual slot the XAUI card is in. + */ + phy-handle = <&phy_xgmii_1>; + phy-connection-type = "xgmii"; + }; + + /* + * We only support one XAUI card, so the MDIO muxing + * is set by U-Boot, and Linux never touches it. + * Therefore, we don't need a virtual MDIO node. + * However, the phy address depends on the slot, so + * only one of the ethernet-phy nodes below will be + * used. + */ + hydra_mdio_xgmii: mdio@f1000 { + status = "disabled"; + + /* XAUI card in slot 1 */ + phy_xgmii_1: ethernet-phy@4 { + reg = <0x4>; + }; + + /* XAUI card in slot 2 */ + phy_xgmii_2: ethernet-phy@0 { + reg = <0x0>; + }; + }; + }; }; rio: rapidio@ffe0c0000 { @@ -176,8 +300,66 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <9 1>; // BRDCFG1 + mux-mask = <0x78>; // EMI1 + + /* + * Virtual MDIO for the two on-board RGMII + * ports. The reg property is already correct. + */ + hydra_mdio_rgmii: rgmii-mdio@8 { + status = "disabled"; + reg = <8>; /* EMI1_EN | 0 */ + #address-cells = <1>; + #size-cells = <0>; + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + /* + * Virtual MDIO for the four-port SGMII card. + * The reg property will be fixed-up + * by U-Boot based on the slot that + * the SGMII card is in. + * + * Note: we do not support DTSEC5 connected to + * SGMII, so this is the only SGMII node. + */ + hydra_mdio_sgmii: sgmii-mdio@28 { + reg = <0x28>; /* EMI1_EN | 0x20 */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy_sgmii_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; }; @@ -240,6 +422,36 @@ 0 0x00010000>; }; }; + + fsl,dpaa { + compatible = "fsl,p5020-dpaa", "fsl,dpaa"; + + ethernet@0 { + compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet0>; + }; + ethernet@1 { + compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet1>; + }; + ethernet@2 { + compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet2>; + status = "disabled"; + }; + ethernet@3 { + compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet3>; + }; + ethernet@4 { + compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet4>; + }; + ethernet@5 { + compatible = "fsl,p5020-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet5>; + }; + }; }; /include/ "fsl/p5020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p5040ds.dts b/arch/powerpc/boot/dts/p5040ds.dts index 6f40520..55b33b6 100644 --- a/arch/powerpc/boot/dts/p5040ds.dts +++ b/arch/powerpc/boot/dts/p5040ds.dts @@ -41,6 +41,49 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + ethernet0 = &fm1dtsec1; + ethernet1 = &fm1dtsec2; + ethernet2 = &fm1dtsec3; + ethernet3 = &fm1dtsec4; + ethernet4 = &fm1dtsec5; + ethernet5 = &fm1tgec; + ethernet6 = &fm2dtsec1; + ethernet7 = &fm2dtsec2; + ethernet8 = &fm2dtsec3; + ethernet9 = &fm2dtsec4; + ethernet10 = &fm2dtsec5; + ethernet11 = &fm2tgec; + + phy_sgmii_slot2_1c = &phy_sgmii_slot2_1c; + phy_sgmii_slot2_1d = &phy_sgmii_slot2_1d; + phy_sgmii_slot2_1e = &phy_sgmii_slot2_1e; + phy_sgmii_slot2_1f = &phy_sgmii_slot2_1f; + + phy_sgmii_slot3_1c = &phy_sgmii_slot3_1c; + phy_sgmii_slot3_1d = &phy_sgmii_slot3_1d; + phy_sgmii_slot3_1e = &phy_sgmii_slot3_1e; + phy_sgmii_slot3_1f = &phy_sgmii_slot3_1f; + + phy_sgmii_slot5_1c = &phy_sgmii_slot5_1c; + phy_sgmii_slot5_1d = &phy_sgmii_slot5_1d; + phy_sgmii_slot5_1e = &phy_sgmii_slot5_1e; + phy_sgmii_slot5_1f = &phy_sgmii_slot5_1f; + + phy_sgmii_slot6_1c = &phy_sgmii_slot6_1c; + phy_sgmii_slot6_1d = &phy_sgmii_slot6_1d; + phy_sgmii_slot6_1e = &phy_sgmii_slot6_1e; + phy_sgmii_slot6_1f = &phy_sgmii_slot6_1f; + + hydra_rg = &hydra_rg; + hydra_sg_slot2 = &hydra_sg_slot2; + hydra_sg_slot3 = &hydra_sg_slot3; + hydra_sg_slot5 = &hydra_sg_slot5; + hydra_sg_slot6 = &hydra_sg_slot6; + hydra_xg_slot1 = &hydra_xg_slot1; + hydra_xg_slot2 = &hydra_xg_slot2; + }; + memory { device_type = "memory"; }; @@ -70,14 +113,17 @@ partition@u-boot { label = "u-boot"; reg = <0x00000000 0x00100000>; + read-only; }; partition@kernel { label = "kernel"; reg = <0x00100000 0x00500000>; + read-only; }; partition@dtb { label = "dtb"; reg = <0x00600000 0x00100000>; + read-only; }; partition@fs { label = "file system"; @@ -108,6 +154,148 @@ reg = <0x4c>; }; }; + + fman0: fman@400000 { + fm1dtsec1: ethernet@e0000 { + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + mdio0: mdio@e1120 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; + + fm1dtsec2: ethernet@e2000 { + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + mdio@e3120 { + tbi1: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + fm1dtsec3: ethernet@e4000 { + tbi-handle = <&tbi2>; + phy-connection-type = "sgmii"; + }; + + mdio@e5120 { + tbi2: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + fm1dtsec4: ethernet@e6000 { + tbi-handle = <&tbi3>; + phy-connection-type = "sgmii"; + }; + + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + tbi3: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + fm1dtsec5: ethernet@e8000 { + tbi-handle = <&tbi4>; + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + mdio@e9120 { + tbi4: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + fm1tgec: ethernet@f0000 { + phy-handle = <&phy_xgmii_slot_2>; + phy-connection-type = "xgmii"; + }; + + xmdio0: mdio@f1000 { + }; + + }; + + fman1: fman@500000 { + fm2dtsec1: ethernet@e0000 { + tbi-handle = <&tbi5>; + phy-connection-type = "sgmii"; + }; + + mdio@e1120 { + tbi5: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + fm2dtsec2: ethernet@e2000 { + tbi-handle = <&tbi6>; + phy-connection-type = "sgmii"; + }; + + mdio@e3120 { + tbi6: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + fm2dtsec3: ethernet@e4000 { + tbi-handle = <&tbi7>; + phy-connection-type = "sgmii"; + }; + + mdio@e5120 { + tbi7: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + fm2dtsec4: ethernet@e6000 { + tbi-handle = <&tbi8>; + phy-connection-type = "sgmii"; + }; + + mdio@e7120 { + tbi8: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + fm2dtsec5: ethernet@e8000 { + tbi-handle = <&tbi9>; + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + mdio@e9120 { + tbi9: tbi-phy@8 { + reg = <8>; + device_type = "tbi-phy"; + }; + }; + + fm2tgec: ethernet@f0000 { + phy-handle = <&phy_xgmii_slot_1>; + phy-connection-type = "xgmii"; + }; + }; }; lbc: localbus@ffe124000 { @@ -132,6 +320,7 @@ partition@0 { label = "NAND U-Boot Image"; reg = <0x0 0x02000000>; + read-only; }; partition@2000000 { @@ -161,8 +350,148 @@ }; board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis"; - reg = <3 0 0x40>; + reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <9 1>; // BRDCFG1 + mux-mask = <0x78>; // EMI1 + + /* + * Virtual MDIO for the two on-board RGMII + * ports. The reg property is already correct. + */ + hydra_rg: rgmii-mdio@8 { + status = "disabled"; + reg = <8>; /* EMI1_EN | 0 */ + #address-cells = <1>; + #size-cells = <0>; + + phy_rgmii_0: ethernet-phy@0 { + reg = <0x0>; + }; + phy_rgmii_1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + /* + * Virtual MDIO for the four-port SGMII cards. + */ + hydra_sg_slot2: sgmii-mdio@28 { + reg = <0x28>; /* EMI1_EN | 0x20 */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy_sgmii_slot2_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_slot2_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_slot2_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_slot2_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + hydra_sg_slot3: sgmii-mdio@68 { + reg = <0x68>; /* EMI1_EN | 0x60 */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy_sgmii_slot3_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_slot3_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_slot3_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_slot3_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + hydra_sg_slot5: sgmii-mdio@38 { + reg = <0x38>; /* EMI1_EN | 0x30 */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy_sgmii_slot5_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_slot5_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_slot5_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_slot5_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + hydra_sg_slot6: sgmii-mdio@48 { + reg = <0x48>; /* EMI1_EN | 0x40 */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy_sgmii_slot6_1c: ethernet-phy@1c { + reg = <0x1c>; + }; + phy_sgmii_slot6_1d: ethernet-phy@1d { + reg = <0x1d>; + }; + phy_sgmii_slot6_1e: ethernet-phy@1e { + reg = <0x1e>; + }; + phy_sgmii_slot6_1f: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; + mdio-mux-emi2 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <9 1>; // BRDCFG1 + mux-mask = <0x06>; // EMI2 + + /* FM2 10GEC1 is always on slot 1 */ + hydra_xg_slot1: hydra-xg-slot1@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + status = "disabled"; + + phy_xgmii_slot_1: ethernet-phy@0 { + reg = <4>; + }; + }; + + /* FM1 10GEC1 is always on slot 2 */ + hydra_xg_slot2: hydra-xg-slot2@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + phy_xgmii_slot_2: ethernet-phy@4 { + reg = <0>; + }; + }; + }; }; }; @@ -210,6 +539,61 @@ 0 0x00010000>; }; }; + + fsl,dpaa { + compatible = "fsl,p5040-dpaa", "fsl,dpaa"; + + ethernet@0 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm1dtsec1>; + status = "disabled"; + }; + ethernet@1 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm1dtsec2>; + }; + ethernet@2 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm1dtsec3>; + }; + ethernet@3 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm1dtsec4>; + }; + ethernet@4 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm1dtsec5>; + }; + ethernet@5 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm1tgec>; + }; + ethernet@6 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm2dtsec1>; + status = "disabled"; + }; + ethernet@7 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm2dtsec2>; + }; + ethernet@8 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm2dtsec3>; + }; + ethernet@9 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm2dtsec4>; + }; + ethernet@10 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm2dtsec5>; + }; + ethernet@11 { + compatible = "fsl,p5040-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&fm2tgec>; + }; + }; }; /include/ "fsl/p5040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t4240qds.dts b/arch/powerpc/boot/dts/t4240qds.dts index a4f1bb2..1e6abdf 100644 --- a/arch/powerpc/boot/dts/t4240qds.dts +++ b/arch/powerpc/boot/dts/t4240qds.dts @@ -20,7 +20,7 @@ * Foundation, either version 2 of that License or (at your option) any * later version. * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY @@ -41,6 +41,36 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + phy_rgmii1 = &phyrgmii1; + phy_rgmii2 = &phyrgmii2; + phy_sgmii3 = &phy3; + phy_sgmii4 = &phy4; + phy_sgmii11 = &phy11; + phy_sgmii12 = &phy12; + sgmii_phy11 = &sgmiiphy11; + sgmii_phy12 = &sgmiiphy12; + sgmii_phy13 = &sgmiiphy13; + sgmii_phy14 = &sgmiiphy14; + sgmii_phy21 = &sgmiiphy21; + sgmii_phy22 = &sgmiiphy22; + sgmii_phy23 = &sgmiiphy23; + sgmii_phy24 = &sgmiiphy24; + sgmii_phy31 = &sgmiiphy31; + sgmii_phy32 = &sgmiiphy32; + sgmii_phy33 = &sgmiiphy33; + sgmii_phy34 = &sgmiiphy34; + sgmii_phy41 = &sgmiiphy41; + sgmii_phy42 = &sgmiiphy42; + sgmii_phy43 = &sgmiiphy43; + sgmii_phy44 = &sgmiiphy44; + emi1_rgmii = &t4240mdio0; + emi1_slot1 = &t4240mdio1; + emi1_slot2 = &t4240mdio2; + emi1_slot3 = &t4240mdio3; + emi1_slot4 = &t4240mdio4; + }; + ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 @@ -91,8 +121,165 @@ }; board-control@3,0 { - compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis"; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,tetra-fpga", "fsl,fpga-qixis"; reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; // BRDCFG1 + mux-mask = <0xe0>; // EMI1 + + /* Onboard PHYs */ + t4240mdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phyrgmii1: ethernet-phy@1 { /* FM2.5 */ + reg = <0x1>; + }; + phyrgmii2: ethernet-phy@2 { /* FM1.5 */ + reg = <0x2>; + }; + }; + + /* Slot 1 */ + t4240mdio1: mdio@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy1: ethernet-phy@0 { + reg = <0x0>; + }; + phy2: ethernet-phy@1 { + reg = <0x1>; + }; + phy3: ethernet-phy@2 { + reg = <0x2>; + }; + phy4: ethernet-phy@3 { + reg = <0x3>; + }; + sgmiiphy11: ethernet-phy@1c { + reg = <0x1c>; + }; + sgmiiphy12: ethernet-phy@1d { + reg = <0x1d>; + }; + sgmiiphy13: ethernet-phy@1e { + reg = <0x1e>; + }; + sgmiiphy14: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + /* Slot 2 */ + t4240mdio2: mdio@40 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy5: ethernet-phy@4 { + reg = <0x4>; + }; + phy6: ethernet-phy@5 { + reg = <0x5>; + }; + phy7: ethernet-phy@6 { + reg = <0x6>; + }; + phy8: ethernet-phy@7 { + reg = <0x7>; + }; + sgmiiphy21: ethernet-phy@1c { + reg = <0x1c>; + }; + sgmiiphy22: ethernet-phy@1d { + reg = <0x1d>; + }; + sgmiiphy23: ethernet-phy@1e { + reg = <0x1e>; + }; + sgmiiphy24: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + /* Slot 3 */ + t4240mdio3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy9: ethernet-phy@8 { + reg = <0x8>; + }; + phy10: ethernet-phy@9 { + reg = <0x9>; + }; + phy11: ethernet-phy@a { + reg = <0xa>; + }; + phy12: ethernet-phy@b { + reg = <0xb>; + }; + sgmiiphy31: ethernet-phy@1c { + reg = <0x1c>; + }; + sgmiiphy32: ethernet-phy@1d { + reg = <0x1d>; + }; + sgmiiphy33: ethernet-phy@1e { + reg = <0x1e>; + }; + sgmiiphy34: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + + t4240mdio4: mdio@80 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + phy13: ethernet-phy@c { + reg = <0xc>; + }; + phy14: ethernet-phy@d { + reg = <0xd>; + }; + phy15: ethernet-phy@e { + reg = <0xe>; + }; + phy16: ethernet-phy@f { + reg = <0xf>; + }; + sgmiiphy41: ethernet-phy@1c { + reg = <0x1c>; + }; + sgmiiphy42: ethernet-phy@1d { + reg = <0x1d>; + }; + sgmiiphy43: ethernet-phy@1e { + reg = <0x1e>; + }; + sgmiiphy44: ethernet-phy@1f { + reg = <0x1f>; + }; + }; + }; }; }; @@ -112,6 +299,10 @@ ranges = <0x0 0xf 0xf6000000 0x2000000>; }; + lportals: lac-portals@ff8000000 { + ranges = <0x0 0xf 0xf8000000 0x20000>; + }; + soc: soc@ffe000000 { ranges = <0x00000000 0xf 0xfe000000 0x1000000>; reg = <0xf 0xfe000000 0 0x00001000>; @@ -156,6 +347,152 @@ interrupts = <0x1 0x1 0 0>; }; }; + + fman0: fman@400000 { + enet0: ethernet@e0000 { + phy-handle = <&phy5>; + phy-connection-type = "sgmii"; + }; + + enet1: ethernet@e2000 { + phy-handle = <&phy6>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@e4000 { + phy-handle = <&phy7>; + phy-connection-type = "sgmii"; + }; + + enet3: ethernet@e6000 { + phy-handle = <&phy8>; + phy-connection-type = "sgmii"; + }; + + enet4: ethernet@e8000 { + phy-handle = <&phyrgmii2>; + phy-connection-type = "rgmii"; + }; + + enet5: ethernet@ea000 { + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + }; + + enet6: ethernet@f0000 { /* FM1@TSEC9/FM1@TGEC1 */ + phy-handle = <&xauiphy1>; + phy-connection-type = "xgmii"; + }; + + enet7: ethernet@f2000 { /* FM1@TSEC10/FM1@TGEC2 */ + phy-handle = <&xauiphy2>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + status = "disabled"; + }; + + mdio@fd000 { + status = "disabled"; + }; + + fman0_oh2 { + status = "disabled"; + }; + fman0_oh3 { + status = "disabled"; + }; + fman0_oh4 { + status = "disabled"; + }; + fman0_oh5 { + status = "disabled"; + }; + fman0_oh6 { + status = "disabled"; + }; + }; + + fman1: fman@500000 { + enet8: ethernet@e0000 { + phy-handle = <&phy13>; + phy-connection-type = "sgmii"; + }; + + enet9: ethernet@e2000 { + phy-handle = <&phy14>; + phy-connection-type = "sgmii"; + }; + + enet10: ethernet@e4000 { + phy-handle = <&phy15>; + phy-connection-type = "sgmii"; + }; + + enet11: ethernet@e6000 { + phy-handle = <&phy16>; + phy-connection-type = "sgmii"; + }; + + enet12: ethernet@e8000 { + phy-handle = <&phyrgmii1>; + phy-connection-type = "rgmii"; + }; + + enet13: ethernet@ea000 { + phy-handle = <&phy10>; + phy-connection-type = "sgmii"; + }; + + enet14: ethernet@f0000 { /* FM2@TSEC9/FM2@TGEC1 */ + phy-handle = <&xauiphy3>; + phy-connection-type = "xgmii"; + }; + + enet15: ethernet@f2000 { /* FM2@TSEC10/FM2@TGEC2 */ + phy-handle = <&xauiphy4>; + phy-connection-type = "xgmii"; + }; + + mdio0: mdio@fc000 { + }; + + xmdio0: mdio@fd000 { + xauiphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + xauiphy2: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + xauiphy3: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + xauiphy4: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; + }; + + fman1_oh3 { + status = "disabled"; + }; + fman1_oh4 { + status = "disabled"; + }; + fman1_oh5 { + status = "disabled"; + }; + fman1_oh6 { + status = "disabled"; + }; + }; }; pci0: pcie@ffe240000 { @@ -227,6 +564,74 @@ ranges = <0 0 0xc 0x30000000 0 0x10000000>; }; }; + + fsl,dpaa { + compatible = "fsl,t4240-dpaa", "fsl,dpaa"; + ethernet@0 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet0>; + }; + ethernet@1 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet1>; + }; + ethernet@2 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet2>; + }; + ethernet@3 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet3>; + }; + ethernet@4 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet4>; + }; + ethernet@5 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet5>; + }; + ethernet@6 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet6>; + }; + ethernet@7 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet7>; + }; + ethernet@8 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet8>; + }; + ethernet@9 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet9>; + }; + ethernet@10 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet10>; + }; + ethernet@11 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet11>; + }; + ethernet@12 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet12>; + }; + ethernet@13 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet13>; + }; + ethernet@14 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet14>; + }; + ethernet@15 { + compatible = "fsl,t4240-dpa-ethernet", "fsl,dpa-ethernet"; + fsl,fman-mac = <&enet15>; + }; + }; }; /include/ "fsl/t4240si-post.dtsi" |