summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2015-06-01clk: fix type cast warningLijun Pan
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Change-Id: Ife4ad017add52bdd911b373d5d8dbb55a7e680ec Reviewed-on: http://git.am.freescale.net:8181/37122 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
2015-02-13Merge branch 'rtmerge'Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Conflicts: arch/arm/kvm/mmu.c arch/arm/mm/proc-v7-3level.S arch/powerpc/kernel/vdso32/getcpu.S drivers/crypto/caam/error.c drivers/crypto/caam/sg_sw_sec4.h drivers/usb/host/ehci-fsl.c
2015-02-13Reset to 3.12.37Scott Wood
2014-12-11This reverts commit 59d6bf6f6d2a2e99f2234ac572da5a5938fbd352Tang Yuantian
That commit tried to fix the section mismatch warning by moving the clock driver struct to init section. This is definitely wrong because the kernel would free the memories occupied by this struct after boot while this driver is still registered in the driver core. The kernel would panic when accessing this driver struct. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Change-Id: I3061188d09f504c9e1a0d8771a5336477404d016 Reviewed-on: http://git.am.freescale.net:8181/23314 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Matthew Weigel <Matthew.Weigel@freescale.com>
2014-12-11clk: qoriq: correct variable num_parents calculation errorTang Yuantian
This variable should represent the clock number per PLL. So, rename it and re-calculate it. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Change-Id: I2817f76a076d468073a870edc47e41ef43ffa07f Reviewed-on: http://git.am.freescale.net:8181/22795 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11clock: redefine variable clocks_per_pll as a struct memberTang Yuantian
redefine variable clocks_per_pll as a struct member If there are multiple PLL clock nodes, this variable will get overwritten. Redefined it as a struct member can avoid this. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Change-Id: I892993ffaf046f333c564170a5cac7c845ef9ba8 Reviewed-on: http://git.am.freescale.net:8181/21873 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11clk: ppc-corenet: rename to ppc-qoriq for better representionJingchang Lu
The IP is shared on PPC and ARM, rename it to qoriq for better represention. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: Ib02baa7731d9d1d9955ffde9860deb517d8d7ca8 Reviewed-on: http://git.am.freescale.net:8181/17836 Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
2014-12-11clk: ppc-corenet: remove "fsl,sys-clock" compatible added by LS1Jingchang Lu
The "fixed-clock" could handle the sysclk node properly. Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Change-Id: I1b7fdf0be4f19a32d14240566e17bae2152578d6 Reviewed-on: http://git.am.freescale.net:8181/17832 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Li Xiubo <Li.Xiubo@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11clk: ppc-corenet: Add CLK_OF_DECLARE supportJingchang Lu
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
2014-12-11clk: ppc-corenet: Fix Section mismatch warningJingchang Lu
WARNING: drivers/built-in.o(.data+0x10258): Section mismatch in reference from the variable ppc_corenet_clk_driver to the (unknown reference) .init.rodata:(unknown) The variable ppc_corenet_clk_driver references the (unknown reference) __initconst (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> --- This patch is pulled back from upstream: commit da788acb28386aa896224e784954bb73c99ff26c
2014-01-15clk: exynos5250: fix sysmmu_mfc{l,r} gate clocksAndrew Bresticker
commit 97c3557c3e0413efb1f021f582d1459760e22727 upstream. The gate clocks for the MFC sysmmus appear to be flipped, i.e. GATE_IP_MFC[2] gates sysmmu_mfcl and GATE_IP_MFC[1] gates sysmmu_mfcr. Fix this so that the MFC will start up. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clockAbhilash Kesavan
commit 2feed5aecf5f367b92bd6b6e92afe9e3de466907 upstream. The sysreg (system register) generates control signals for various blocks like disp1blk, i2c, mipi, usb etc. However, it gets disabled as an unused clock at boot-up. This can lead to failures in operation of above blocks, because they can not be configured properly if this clock is disabled. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15clk: samsung: exynos5250: Add MDMA0 clocksAbhilash Kesavan
commit 8fb9aeb7a71ef4f3e0613d459a2e1366a7a90469 upstream. Adds gate clock for MDMA0 on Exynos5250 SoC. This is needed to ensure that the clock is enabled when MDMA0 is used on systems on which firmware gates the clockby default. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15clk: samsung: exynos5250: Fix ACP gate register offsetAbhilash Kesavan
commit 3bf34666a0cce5234ac677ed2fbe5cea82c71329 upstream. The CLK_GATE_IP_ACP register offset is incorrectly listed making definition of g2d clock incorrect, which may lead to system failures when trying to use G2D on systems on which firmware gates this clock by default. Fix this and the register ordering as well. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15clk: samsung: exynos4: Correct SRC_MFC registerSeung-Woo Kim
commit 5fdd1b56be51b1ec4dbde5b213d649ac717442da upstream. The SRC_MFC register offset was incorrect, which could cause have caused wrong calculation of rate of sclk_mfc clock, that could in turn lead to incorrect operation of MFC. This patch corrects it. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description] Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-15clk: clk-divider: fix divisor > 255 bugJames Hogan
commit 778037e1ccb75609846deca9e419449c1dc137fa upstream. Commit 6d9252bd9a4bb (clk: Add support for power of two type dividers) merged in v3.6 added the _get_val function to convert a divisor value to a register field value depending on the flags. However it used the type u8 for the div field, causing divisors larger than 255 to be masked and the resultant clock rate to be too high. E.g. in my case an 11bit divider was supposed to divide 24.576 MHz down to 32.768KHz. The divisor was correctly calculated as 750 (0x2ee). This was masked to 238 (0xee) resulting in a frequency of 103.26KHz. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-08clk: fixup argument order when setting VCO parametersJonathan Austin
The order of arguments in the call to vco_set() for the ICST clocks appears to have been switched in error, which results in the VCO not being initialised correctly. This in turn stops the integrated LCD on things like Integrator/CP from working correctly. This patch fixes the order and restores the expected functionality. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Austin <jonathan.austin@arm.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: stable@vger.kernel.org
2013-10-08clk: socfpga: Fix incorrect sdmmc clock nameDinh Nguyen
The SD/MMC clock is named "sdmmc_clk", and NOT "mmc_clk". Because of this, the SD driver was getting the incorrect clock value. This prevented the SD driver from initializing correctly. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Olof Johansson <olof@lixom.net> Reviewed-by: Pavel Machek <pavel@denx.de> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-10-07clk: armada-370: fix tclk frequenciesSimon Guinot
This patch fixes the tclk frequency array for the Armada-370 SoC. This bug has been introduced by commit 6b72333d ("clk: mvebu: add Armada 370 SoC-centric clock init"). A wrong tclk frequency affects the following drivers: mvsdio, mvneta, i2c-mv64xxx and mvebu-devbus. This list may be incomplete. About the mvneta Ethernet driver, note that the tclk frequency is used to compute the Rx time coalescence. Then, this bug harms the coalescence configuration and also degrades the networking performances with the default values. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: stable@vger.kernel.org Signed-off-by: Michael Turquette <mturquette@deferred.io>
2013-10-02clk: nomadik: set all timers to use 2.4 MHz TIMCLKLinus Walleij
This fixes a regression for the Nomadik on the main system timers. The Nomadik seemed a bit slow and its heartbeat wasn't looking healthy. And it was not strange, because it has been connected to the 32768 Hz clock at boot, while being told by the clock driver that it was 2.4MHz. Actually connect the TIMCLK to 2.4MHz by default as this is what we want for nice scheduling, clocksource and clock event. Cc: stable@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-09Merge tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clock framework changes from Michael Turquette: "The common clk framework changes for 3.12 are dominated by clock driver patches, both new drivers and fixes to existing. A high percentage of these are for Samsung platforms like Exynos. Core framework fixes and some new features like automagical clock re-parenting round out the patches" * tag 'clk-for-linus-3.12' of git://git.linaro.org/people/mturquette/linux: (102 commits) clk: only call get_parent if there is one clk: samsung: exynos5250: Simplify registration of PLL rate tables clk: samsung: exynos4: Register PLL rate tables for Exynos4x12 clk: samsung: exynos4: Register PLL rate tables for Exynos4210 clk: samsung: exynos4: Reorder registration of mout_vpllsrc clk: samsung: pll: Add support for rate configuration of PLL46xx clk: samsung: pll: Use new registration method for PLL46xx clk: samsung: pll: Add support for rate configuration of PLL45xx clk: samsung: pll: Use new registration method for PLL45xx clk: samsung: exynos4: Rename exynos4_plls to exynos4x12_plls clk: samsung: exynos4: Remove checks for DT node clk: samsung: exynos4: Remove unused static clkdev aliases clk: samsung: Modify _get_rate() helper to use __clk_lookup() clk: samsung: exynos4: Use separate aliases for cpufreq related clocks clocksource: samsung_pwm_timer: Get clock from device tree ARM: dts: exynos4: Specify PWM clocks in PWM node pwm: samsung: Update DT bindings documentation to cover clocks clk: Move symbol export to proper location clk: fix new_parent dereference before null check clk: wm831x: Initialise wm831x pointer on init ...
2013-09-09clk: only call get_parent if there is oneAlex Elder
In __clk_init(), after a clock is mostly initialized, a scan is done of the orphan clocks to see if the clock being registered is the parent of any of them. This code assumes that any clock that provides a get_parent method actually has at least one parent, and that's not a valid assumption. As a result, an orphan clock with no parent can return *something* as the parent index, and that value is blindly used to dereference the orphan's parent_names[] array (which will be ZERO_SIZE_PTR or NULL). Fix this by ensuring get_parent is only called for orphans with at least one parent. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos5250: Simplify registration of PLL rate tablesTomasz Figa
Since the _get_rate() helper has been modified to use __clk_lookup() internally, checking of PLL input rates can be done using it and so the registration code can be simplified. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Register PLL rate tables for Exynos4x12Tomasz Figa
This patch adds rate tables for PLLs that can be reconfigured at runtime for Exynos4x12 SoCs. Provided tables contain PLL coefficients for input clock of 24 MHz and so are registered only in this case. MPLL does not need runtime reconfiguration and so table for it is not provided. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Register PLL rate tables for Exynos4210Tomasz Figa
This patch adds rate tables for PLLs that can be reconfigured at runtime for Exynos4210 SoCs. Provided tables contain PLL coefficients for input clock of 24 MHz and so are registered only in this case. MPLL does not need runtime reconfiguration and so table for it is not provided. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Reorder registration of mout_vpllsrcTomasz Figa
Since PLL input frequency must be known before PLL registration, mout_vpllsrc clock which is a reference clock of VPLL must be registered before VPLL. This patch reorders clock registration to register mout_vpllsrc before VPLL. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: pll: Add support for rate configuration of PLL46xxTomasz Figa
This patch implements round_rate and set_rate callbacks of PLL46xx driver to allow reconfiguration of PLL at runtime. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: pll: Use new registration method for PLL46xxTomasz Figa
This patch modifies PLL46xx support code and its users to use the recently introduced common PLL registration helper. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: pll: Add support for rate configuration of PLL45xxTomasz Figa
This patch implements round_rate and set_rate callbacks of PLL45xx driver to allow reconfiguration of PLL at runtime. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: pll: Use new registration method for PLL45xxTomasz Figa
This patch modifies PLL45xx support code and its users to use the recently introduced common PLL registration helper. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Rename exynos4_plls to exynos4x12_pllsTomasz Figa
This array defines PLLs specific to Exynos 4x12 SoCs and not for all Exynos 4 SoCs, so the name should represent that. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Remove checks for DT nodeTomasz Figa
Exynos 4 supports only DT based bootup, so non-DT cases does not need to be handled anymore. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Remove unused static clkdev aliasesTomasz Figa
Since Exynos does not support legacy non-DT boot anymore, most of clock lookups happen using device tree, so most of static clkdev aliases are no longer necessary. This patch removes them. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: Modify _get_rate() helper to use __clk_lookup()Tomasz Figa
There is no need to use clkdev inside the clock driver to retrieve the clocks for internal use. Instead __clk_lookup() helper can be used to look up clocks by their platform name. This patch modifies the behavior of _get_rate() helper to look up clocks by platform name and adjusts all users of it to pass platform names instead of clkdev aliases. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06clk: samsung: exynos4: Use separate aliases for cpufreq related clocksTomasz Figa
Exynos cpufreq driver is the only remaining piece of code that needs static clkdev aliases for operation, because it can not do device tree based clock lookups yet. This patch moves clock alias definitions for those clocks to separate arrays that can be used with samsung_clk_register_alias() helper. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-09-06Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Olof Johansson: "This branch contains mostly additions and changes to platform enablement and SoC-level drivers. Since there's sometimes a dependency on device-tree changes, there's also a fair amount of those in this branch. Pieces worth mentioning are: - Mbus driver for Marvell platforms, allowing kernel configuration and resource allocation of on-chip peripherals. - Enablement of the mbus infrastructure from Marvell PCI-e drivers. - Preparation of MSI support for Marvell platforms. - Addition of new PCI-e host controller driver for Tegra platforms - Some churn caused by sharing of macro names between i.MX 6Q and 6DL platforms in the device tree sources and header files. - Various suspend/PM updates for Tegra, including LP1 support. - Versatile Express support for MCPM, part of big little support. - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7) - OMAP2+ support for DRA7, a new Cortex-A15-based SoC. The code that touches other architectures are patches moving MSI arch-specific functions over to weak symbols and removal of ARCH_SUPPORTS_MSI, acked by PCI maintainers" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits) tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list ARM: dts: vf610-twr: enable i2c0 device ARM: dts: i.MX51: Add one more I2C2 pinmux entry ARM: dts: i.MX51: Move pins configuration under "iomuxc" label ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX ARM: dts: i.MX27: Disable AUDMUX in the template ARM: dts: wandboard: Add support for SDIO bcm4329 ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template ARM: dts: imx53-qsb: Make USBH1 functional ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module ARM: dts: imx6qdl-sabresd: Add touchscreen support ARM: imx: add ocram clock for imx53 ARM: dts: imx: ocram size is different between imx6q and imx6dl ARM: dts: imx27-phytec-phycore-som: Fix regulator settings ARM: dts: i.MX27: Remove clock name from CPU node ...
2013-09-03clk: Move symbol export to proper locationThierry Reding
The __clk_get_flags() symbol is exported immediately following the clk_unprepare_unused_subtree() function. This is unusual, since a symbol export typically follows body of the function that it exports. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-30clk: fix new_parent dereference before null checkJames Hogan
Commit 71472c0 (clk: add support for clock reparent on set_rate) added a dereference of the new_parent pointer in clk_reparent(), but as detected by smatch clk_reparent() later checks whether new_parent is NULL. The dereference was in order to clear the new parent's new_child pointer to avoid duplicate POST_RATE_CHANGE notifications, so clearly isn't necessary if the new parent is NULL, so move it inside the "if (new_parent)" block. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-30clk: wm831x: Initialise wm831x pointer on initMark Brown
Otherwise any attempt to interact with the hardware will crash. This is what happens when drivers get written blind. Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-30clk/exynos5420: assign dout_pixel id to pixel clock dividerRahul Sharma
dout_pixel is a new ID allocated for pixel clock divider. It is queried in the driver to pass as the parent to hdmi clock while switching between parents. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-30clk/exynos5420: add hdmi mux to change parents in hdmi driverRahul Sharma
hdmi driver needs to change the parent of hdmi clock to pixel clock or hdmiphy clock, based on the stability of hdmiphy. This patch is exposing the mux for changing the parent. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-30clk/exynos5420: fix the order of parents of hdmi muxRahul Sharma
Listing sclk_hdmiphy at 0th position in the list of parents is causing wrong configuration in reg SRC_DISP10. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-30clk/exynos5420: add gate clock for mixer sysmmuRahul Sharma
Adding sysmmu clock for mixer for exynos5420. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-30clk/exynos5420: add sclk_hdmiphy to the list of special clocksRahul Sharma
Add sclk_hdmiphy to the list of exposed clocks. This is required by hdmi driver to change the parent of hdmi clock. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Acked-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-30clk: wm831x: Provide is_prepared() rather than is_enabled()Mark Brown
Since the driver was written an is_prepared() operation has been made possible. Since the driver uses I2C I/O only prepare operations are provided so move the is_enabled() operation over to is_prepared(). Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-29clk/exynos5250: change parent to aclk200_disp1 for hdmi subsystemRahul Sharma
parent of hdmi and mixer block is mentioned as aclk200 which is not correct. It is clocked by the ouput of aclk200_disp1. Hence parent for mixer and hdmi clocks is changed to aclk200_disp1. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-29clk: tegra30: Don't wait for PLL_U lock bitTuomas Tynkkynen
The lock bit on PLL_U does not seem to be working correctly and sometimes never gets set when waiting for the PLL to come up. Remove the TEGRA_PLL_USE_LOCK flag to use a constant delay. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-28clk: s3c64xx: Fix incorrect placement of __initdataSachin Kamat
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-08-28clk: sunxi: Fix incorrect placement of __initconstSachin Kamat
__initconst should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Emilio López <emilio@elopez.com.ar> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: refreshed patch based on sunxi changes]
2013-08-28clk: kirkwood: Fix incorrect placement of __initconstSachin Kamat
__initconst should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Gregory Clement <gregory.clement@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
generated by cgit v0.10.2 at 2024-06-08 18:35:04 (GMT)